Gentoo Linux 2007.0 PPC Networkless HandbookContent:
A. Installing Gentoo1. About the Gentoo Linux InstallationFirst of all, welcome to Gentoo. You are about to enter the world of customization and performance. When installing Gentoo, this is made clear to you several times -- you can choose how much you want to compile yourself, how to install Gentoo, what system logger you want, etc. Gentoo is a fast, modern meta-distribution with a clean and flexible design. Gentoo is built around free software and doesn't hide from its users what is beneath the hood. Portage, the package maintenance system which Gentoo uses, is written in Python, meaning you can easily view and modify the source code. Gentoo's packaging system uses source code (although support for precompiled packages is included too) and configuring Gentoo happens through regular text files. In other words, openness everywhere. It is very important that you understand that empowerment is what makes Gentoo run. We try not to force anything on our users and try our best to empower you to make the choices you wish. If you feel a change should be made, please file a bug report about it. How is the Installation Structured? The Gentoo Installation can be seen as a 10-step procedure, corresponding to chapters 2 - 11. Every step results in a certain state:
When you are given a certain choice, we try our best to explain what the pros and cons are. We will continue then with a default choice, identified by "Default: " in the title. The other possibilities are marked by "Alternative: ". Do not think that the default is what we recommend. It is however what we believe most users will use. Sometimes you can pursue an optional step. Such steps are marked as "Optional: " and are therefore not needed to install Gentoo. However, some optional steps are dependant on a previous decision you made. We will inform you when this happens, both when you make the decision, and right before the optional step is described. You can install Gentoo in many different ways. You can download and install from one of our Installation CDs, from an existing distribution, from a bootable CD (such as Knoppix), from a netbooted environment, from a rescue floppy, etc. This document covers the installation using a Gentoo Linux Installation CD, a bootable CD that contains everything you need to get Gentoo Linux up and running. There are two types of Installation CDs, the InstallCD and the Installer LiveCD. The InstallCD is a minimal environment which contains only those packages necessary for installing Gentoo Linux. The LiveCD is a complete Gentoo Linux environment and can be used for multiple tasks, one of which is installing Gentoo Linux. The LiveCD is not available on all architectures at this time. If your architecture does not have a LiveCD, then this document will refer to the Universal InstallCD for you. This installation approach however does not immediately use the latest version of the available packages; if you want this you should check out the Installation Instructions inside our Gentoo Linux Handbooks. For help on the other installation approaches, please read our Alternative Installation Guide. We also provide a Gentoo Installation Tips & Tricks document that might be useful to read as well. If you feel that the current installation instructions are too elaborate, feel free to use our Quick Installation Guide available from our Documentation Resources if your architecture has such a document available. If you find a problem in the installation (or in the installation documentation), please check the errata from our Gentoo Release Engineering Project, visit our bug tracking system and check if the bug is known. If not, please create a bug report for it so we can take care of it. Do not be afraid of the developers who are assigned to (your) bugs -- they generally don't eat people. Note though that, although the document you are now reading is architecture-specific, it will contain references to other architectures as well. This is due to the fact that large parts of the Gentoo Handbook use source code that is common for all architectures (to avoid duplication of efforts and starvation of development resources). We will try to keep this to a minimum to avoid confusion. If you are uncertain if the problem is a user-problem (some error you made despite having read the documentation carefully) or a software-problem (some error we made despite having tested the installation/documentation carefully) you are free to join #gentoo on irc.freenode.net. Of course, you are welcome otherwise too :) If you have a question regarding Gentoo, check out our Frequently Asked Questions, available from the Gentoo Documentation. You can also view the FAQs on our forums. If you can't find the answer there ask on #gentoo, our IRC-channel on irc.freenode.net. Yes, several of us are freaks who sit on IRC :-) 1.b. Fast Installation using the Gentoo Reference Platform What is the Gentoo Reference Platform? The Gentoo Reference Platform, from now on abbreviated to GRP, is a snapshot of prebuilt packages users (that means you!) can install during the installation of Gentoo to speed up the installation process. The GRP consists of all packages required to have a fully functional Gentoo installation. They are not just the ones you need to have a base installation up to speed in no time, but all lengthier builds (such as xorg-x11, GNOME, OpenOffice, Mozilla, ...) are available as GRP packages too. However, these prebuilt packages aren't maintained during the lifetime of the Gentoo distribution. They are snapshots released at every Gentoo release and make it possible to have a functional environment in a short amount of time. You can then upgrade your system in the background while working in your Gentoo environment. How Portage Handles GRP Packages Your Portage tree - the collection of ebuilds (files that contain all information about a package, such as its description, homepage, sourcecode URLs, compilation instructions, dependencies, etc.) - must be synchronised with the GRP set: the versions of the available ebuilds and their accompanying GRP packages must match. For this reason you can only benefit from the GRP packages Gentoo provides while performing the current installation approach. GRP is not available for those interested in performing an installation using the latest versions of all available packages. Not all architectures provide GRP packages. That doesn't mean GRP isn't supported on the other architectures, but it means that we don't have the resources to build and test the GRP packages. At present we provide GRP packages for the following architectures:
If your architecture (or subarchitecture) isn't on this list, you are not able to opt for a GRP installation. Now that this introduction is over, let's continue with Booting the Universal InstallCD/Installer LiveCD. 2. Booting the Universal Installation CDBefore we start, we first list what hardware requirements you need to successfully install Gentoo on your box.
Be sure to read the Gentoo PPC FAQ for help with some common installation related issues or if you're unsure as to just what's in that PowerPC machine you've got sitting on your desk right now. 2.b. The Gentoo Universal Installation CD Gentoo Linux can be installed using a stage3 tarball file. Such a tarball is an archive that contains a minimal environment from which you can succesfully install Gentoo Linux onto your system. Installations using a stage1 or stage2 tarball file are not documented in the Gentoo Handbook - please read the Gentoo FAQ on these matters. Gentoo Universal Installation CD An Installation CD is a bootable medium which contains a self-sustained Gentoo environment. It allows you to boot Linux from the CD. During the boot process your hardware is detected and the appropriate drivers are loaded. The Gentoo Installation CDs are maintained by Gentoo developers. There currently are two Installation CDs available:
Gentoo also provides a Package CD. This is not an Installation CD but an additional resource that you can exploit during the installation of your Gentoo system. It contains prebuilt packages (also known as the GRP set) that allow you to easily and quickly install additional applications (such as OpenOffice.org, KDE, GNOME, ...) immediately after the Gentoo installation and right before you update your Portage tree. The use of the Package CD is covered later in this document. 2.c. Download, Burn and Boot the Gentoo Universal Installation CD Downloading and Burning the Installation CD You can download the Universal Installation CD (and, if you want to, the Packages CD as well) from one of our mirrors. The Installation CDs are located in the releases/ppc/2007.0/ppc32/installcd directory; the Package CDs are located in the releases/ppc/2007.0/ppc32/packagecd directory. Inside those directories you'll find ISO-files. Those are full CD images which you can write on a CD-R. After downloading the file, you can verify its integrity to see if it is corrupted or not:
To fetch our public key using the GnuPG application, run the following command:
Now verify the signature:
To burn the downloaded ISO(s), you have to select raw-burning. How you do this is highly program-dependent. We will discuss cdrecord and K3B here; more information can be found in our Gentoo FAQ.
Default: Booting the Installation CD with Yaboot On NewWorld machines place the Installation CD in the CD-ROM and reboot the system. When the system-start-bell sounds, simply hold down the 'C' until the CD loads. After the Installation CD loaded, you will be greeted by a friendly welcome message and a boot: prompt at the bottom of the screen. We provide one generic kernel, apple. This kernel is built with support for multiple CPUs, but it will boot on single processor machines as well. You can tweak some kernel options at this prompt. The following table lists some of the available boot options you can add:
To use the above options, at the boot: prompt, type apple followed by the desired option. In the example below, we'll force the kernel to use the Open Firmware framebuffer instead of the device specific driver.
If you don't need to add any options, just hit enter at this prompt, and a complete Gentoo Linux environment will be loaded from the CD. Continue with And When You're Booted.... Alternative: Booting the Installation CD on a Pegasos On the Pegasos simply insert the CD and at the SmartFirmware boot-prompt type boot cd /boot/menu. This will open a small bootmenu where you can choose between several preconfigured video configs. If you need any special boot options you can append them to the command-line just like with Yaboot above. For example: boot cd /boot/pegasos video=radeonfb:1280x1024@75 mem=256M. The default kernel options (in case something goes wrong and you need it) are preconfigured with console=ttyS0,115200 console=tty0 init=/linuxrc looptype=squashfs loop=/image.squashfs cdroot root=/dev/ram0. Alternative: Booting the Installation CD with BootX If you have an OldWorld Mac the bootable portion of the livecd can't be used. The most simple solution is to use MacOS 9 or earlier to bootstrap into a Linux environment with a tool called BootX. First, download BootX and unpack the archive. Copy the the BootX Extension from the unpacked archive into Extensions Folder and the BootX App Control Panel into Control Panels, both of which are located in your MacOS System Folder. Next, create a folder called "Linux Kernels" in your System folder and copy the apple kernel from the CD to this folder. Finally, copy apple.igz from the Installation CD boot folder into the MacOS System Folder. To prepare BootX, start the BootX App Control Panel. First select the Options dialog and check Use Specified RAM Disk and select apple.igz from your System Folder. Continue back to the initial screen and ensure that the ramdisk size is at least 32000. Finally, set the kernel arguments as shown below:
Check once more to make sure the settings are correct and then save the configuration. This saves typing just in case it doesn't boot or something is missing. Press the Linux button at the top of the window. If everything goes correctly, it should boot into the Installation CD. Continue with And When You're Booted... You will be greeted by a root ("#") prompt on the current console. You can also switch to other consoles by pressing Alt-F2, Alt-F3 and Alt-F4. Get back to the one you started on by pressing Alt-F1. Due to the keyboard layout, you may need to press Alt-fn-Fx on Apple machines. If you are installing Gentoo on a system with a non-US keyboard, use loadkeys to load the keymap for your keyboard. To list the available keymaps, execute ls /usr/share/keymaps/i386. On NewWorld machines or the Pegasos do not use the keymaps in ppc or mac as they are for ADB-based OldWorld machines.
Now load the keymap of your choice:
Now continue with Extra Hardware Configuration. When the Installation CD boots, it tries to detect all your hardware devices and loads the appropriate kernel modules to support your hardware. In the vast majority of cases, it does a very good job. However, in some cases, it may not auto-load the kernel modules you need. If the PCI auto-detection missed some of your system's hardware, you will have to load the appropriate kernel modules manually. In the next example we try to load the airport module. This module supports only the old Airport cards (802.11b). Airport Extreme (802.11g) is not supported on the InstallCD due to restrictions on firmware distribution.
On older iMacs, sometimes the network card is not detected properly. These use the BMAC driver:
Optional: Tweaking Hard Disk Performance If you are an advanced user, you might want to tweak the IDE hard disk performance using hdparm. With the -tT options you can test the performance of your disk (execute it several times to get a more precise impression):
To tweak, you can use any of the following examples (or experiment yourself) which use /dev/hda as disk (substitute with your disk):
If you plan on giving other people access to your installation environment or you want to chat using irssi without root privileges (for security reasons), you need to create the necessary user accounts and change the root password. To change the root password, use the passwd utility:
To create a user account, we first enter their credentials, followed by its password. We use useradd and passwd for these tasks. In the next example, we create a user called "john".
You can change your user id from root to the newly created user by using su:
Optional: Viewing Documentation while Installing If you want to view the Gentoo Handbook (either from-CD or online) during the installation, make sure you have created a user account (see Optional: User Accounts). Then press Alt-F2 to go to a new terminal and log in. If you want to view the documentation on the CD you can immediately run links or even links -g for a graphical framebuffer browser to read it:
However, it is preferred that you use the online Gentoo Handbook as it will be more recent than the one provided on the CD. You can view it using links as well, but only after having completed the Configuring your Network chapter (otherwise you won't be able to go on the Internet to view the document):
You can go back to your original terminal by pressing Alt-F1. Optional: Starting the SSH Daemon If you want to allow other users to access your computer during the Gentoo installation (perhaps because those users are going to help you install Gentoo, or even do it for you), you need to create a user account for them and perhaps even provide them with your root password (only do that if you fully trust that user). To fire up the SSH daemon, execute the following command:
To be able to use sshd, you first need to set up your networking. Continue with the chapter on Configuring your Network. 3. Configuring your NetworkGenerally, you don't need a working network connection to install Gentoo using either the Universal InstallCD or the Installer LiveCD. However, there are some circumstances where you do want to have a working Internet connection:
To find out if the stage3 file for your architecture is available and you are using a Universal InstallCD, take a look inside /mnt/cdrom/stages and check if one of the available stages matches your architecture. If not, you can still opt for a stage3 file of an architecture compatible with yours. The stage3 file built by the x86 Installer LiveCD is optimized for i686 or better and uses NPTL. The stage3 file built by the amd64 Installer LiveCD is optimized for generic amd64 usage and uses NPTL. If you, on the other hand, want to use a stage3 file optimized for your architecture and the stage3 file of your choice is not available, then you will need networking to download the appropriate stage3 file. So, if you don't need networking, you can skip the rest of this chapter and continue with Preparing the Disks. Otherwise, continue with the networking configuration sections below. 3.b. Automatic Network Detection If your system is plugged into an Ethernet network with a DHCP server, it is very likely that your networking configuration has already been set up automatically for you. If so, you should be able to take advantage of the many included network-aware commands on the Installation CD such as ssh, scp, ping, irssi, wget and links, among others. If networking has been configured for you, the /sbin/ifconfig command should list some network interfaces besides lo, such as eth0:
Optional: Configure any Proxies If you access the Internet through a proxy, you might need to set up proxy information during the installation. It is very easy to define a proxy: you just need to define a variable which contains the proxy server information. In most cases, you can just define the variables using the server hostname. As an example, we assume the proxy is called proxy.gentoo.org and the port is 8080.
If your proxy requires a username and password, you should use the following syntax for the variable:
You may want to try pinging your ISP's DNS server (found in /etc/resolv.conf) and a Web site of your choice, just to make sure that your packets are reaching the net, DNS name resolution is working correctly, etc.
If you are now able to use your network, you can skip the rest of this section and continue with Preparing the Disks. If not, read on. 3.c. Automatic Network Configuration If the network doesn't work immediately, some installation media allow you to use net-setup (for regular or wireless networks), pppoe-setup (for ADSL-users) or pptp (for PPTP-users - only available on x86). If your installation medium does not contain any of these tools or your network doesn't function yet, continue with Manual Network Configuration.
The simplest way to set up networking if it didn't get configured automatically is to run the net-setup script:
net-setup will ask you some questions about your network environment. When all is done, you should have a working network connection. Test your network connection as stated before. If the tests are positive, congratulations! You are now ready to install Gentoo. Skip the rest of this section and continue with Preparing the Disks. If your network still doesn't work, continue with Manual Network Configuration. Assuming you need PPPoE to connect to the internet, the Installation CD (any version) has made things easy for you by including ppp. Use the provided pppoe-setup script to configure your connection. You will be prompted for the ethernet device that is connected to your adsl modem, your username and password, the IPs of your DNS servers and if you need a basic firewall or not.
If something goes wrong, double-check that you correctly typed your username and password by looking at /etc/ppp/pap-secrets or /etc/ppp/chap-secrets and make sure you are using the right ethernet device. If your ethernet device doesn't exist, you will have to load the appropriate network modules. In that case you should continue with Manual Network Configuration as we explain how to load the appropriate network modules there. If everything worked, continue with Preparing the Disks.
If you need PPTP support, you can use pptpclient which is provided by our Installation CDs. But first you need to make sure that your configuration is correct. Edit /etc/ppp/pap-secrets or /etc/ppp/chap-secrets so it contains the correct username/password combination:
Then adjust /etc/ppp/options.pptp if necessary:
When all that is done, just run pptp (along with the options you couldn't set in options.pptp) to connect the server:
Now continue with Preparing the Disks. 3.d. Manual Network Configuration Loading the Appropriate Network Modules When the Installation CD boots, it tries to detect all your hardware devices and loads the appropriate kernel modules (drivers) to support your hardware. In the vast majority of cases, it does a very good job. However, in some cases, it may not auto-load the kernel modules you need. If net-setup or pppoe-setup failed, then it is possible that your network card wasn't found immediately. This means you may have to load the appropriate kernel modules manually. To find out what kernel modules we provide for networking, use ls:
If you find a driver for your network card, use modprobe to load the kernel module:
To check if your network card is now detected, use ifconfig. A detected network card would result in something like this:
If however you receive the following error, the network card is not detected:
If you have multiple network cards in your system they are named eth0, eth1, etc. Make sure that the network card you want to use works well and remember to use the correct naming throughout this document. We will assume that the network card eth0 is used. Assuming that you now have a detected network card, you can retry net-setup or pppoe-setup again (which should work now), but for the hardcore people amongst you we explain how to configure your network manually. Select one of the following sections based on your network setup:
DHCP (Dynamic Host Configuration Protocol) makes it possible to automatically receive networking information (IP address, netmask, broadcast address, gateway, nameservers etc.). This only works if you have a DHCP server in your network (or if your provider provides a DHCP service). To have a network interface receive this information automatically, use dhcpcd:
If this works (try pinging some internet server, like Google), then you are all set and ready to continue. Skip the rest of this section and continue with Preparing the Disks.
If you are using a wireless (802.11) card, you may need to configure your wireless settings before going any further. To see the current wireless settings on your card, you can use iwconfig. Running iwconfig might show something like:
For most users, there are only two settings that might be important to change, the ESSID (aka wireless network name) or the WEP key. If the ESSID and Access Point address listed are already that of your access point and you are not using WEP, then your wireless is working. If you need to change your ESSID, or add a WEP key, you can issue the following commands:
You can then confirm your wireless settings again by using iwconfig. Once you have wireless working, you can continue configuring the IP level networking options as described in the next section (Understanding Network Terminology) or use the net-setup tool as described previously. Understanding Network Terminology
If all of the above fails, you will have to configure your network manually. This is not difficult at all. However, you need to be familiar with some network terminology, as you will need it to be able to configure your network to your satisfaction. After reading this, you will know what a gateway is, what a netmask serves for, how a broadcast address is formed and why you need nameservers. In a network, hosts are identified by their IP address (Internet Protocol address). Such an address is a combination of four numbers between 0 and 255. Well, at least that is how we perceive it. In reality, such an IP address consists of 32 bits (ones and zeros). Let's view an example:
Such an IP address is unique to a host as far as all accessible networks are concerned (i.e. every host that you are able to reach must have a unique IP address). In order to distinguish between hosts inside and outside a network, the IP address is divided in two parts: the network part and the host part. The separation is written down with the netmask, a collection of ones followed by a collection of zeros. The part of the IP that can be mapped on the ones is the network-part, the other one is the host-part. As usual, the netmask can be written down as an IP-address.
In other words, 192.168.0.14 is still part of our example network, but 192.168.1.2 is not. The broadcast address is an IP-address with the same network-part as your network, but with only ones as host-part. Every host on your network listens to this IP address. It is truly meant for broadcasting packets.
To be able to surf on the internet, you must know which host shares the Internet connection. This host is called the gateway. Since it is a regular host, it has a regular IP address (for instance 192.168.0.1). We previously stated that every host has its own IP address. To be able to reach this host by a name (instead of an IP address) you need a service that translates a name (such as dev.gentoo.org) to an IP address (such as 64.5.62.82). Such a service is called a name service. To use such a service, you must define the necessary name servers in /etc/resolv.conf. In some cases, your gateway also serves as nameserver. Otherwise you will have to enter the nameservers provided by your ISP. To summarise, you will need the following information before continuing:
Setting up your network consists of three steps. First we assign ourselves an IP address using ifconfig. Then we set up routing to the gateway using route. Then we finish up by placing the nameserver IPs in /etc/resolv.conf. To assign an IP address, you will need your IP address, broadcast address and netmask. Then execute the following command, substituting ${IP_ADDR} with your IP address, ${BROADCAST} with your broadcast address and ${NETMASK} with your netmask:
Now set up routing using route. Substitute ${GATEWAY} with your gateway IP address:
Now open /etc/resolv.conf with your favorite editor (in our example, we use nano):
Now fill in your nameserver(s) using the following as a template. Make sure you substitute ${NAMESERVER1} and ${NAMESERVER2} with the appropriate nameserver addresses:
That's it. Now test your network by pinging some Internet server (like Google). If this works, congratulations then. You are now ready to install Gentoo. Continue with Preparing the Disks. 4. Preparing the Disks4.a. Introduction to Block Devices We'll start by taking a good look at disk-oriented aspects of Gentoo Linux and Linux in general, including Linux filesystems, partitions and block devices. Then, once you're familiar with the ins and outs of disks and filesystems, you'll be guided through the process of setting up partitions and filesystems for your Gentoo Linux installation. To begin, we'll introduce block devices. The most common block device is the one that represents the first IDE drive in a Linux system, namely /dev/hda. If you are installing onto SCSI, FireWire, USB or SATA drives, then your first hard drive would be /dev/sda. Additional drives are enumerated by the next letter in the alphabet. As an example, the third IDE disk could be found at /dev/hdc. The block devices above represent an abstract interface to the disk. User programs can use these block devices to interact with the disk without worrying about whether the drives are IDE, SCSI or something else. The program can simply address the storage on the disk as a bunch of contiguous, randomly-accessible 512-byte blocks. Although it is theoretically possible to use a full disk to house your Linux system, this is almost never done in practice. Instead, full disk block devices are split up in smaller, more manageable block devices. On most systems, these are called partitions. 4.b. Designing a Partitioning Scheme If you are not interested in drawing up a partitioning scheme for your system, you can use the partitioning scheme we use throughout this book. Choose the filesystem layout that best matches the type of PowerPC system you are installing on. Apple New World machines are fairly straightforward to configure. The first partition is always an Apple Partition Map. This partition keeps track of the layout of the disk. You cannot remove this partition. The next partition should always be a bootstrap partition. This partition contains a small (800k) HFS filesystem that holds a copy of the bootloader Yaboot and its configuration file. This partition is not the same as a /boot partition as found on other architectures. After the boot partition, the usual Linux filesystems are placed, according to the scheme below. The swap partition is a temporary storage place for when your system runs out of physical memory. The root partition will contain the filesystem that Gentoo is installed on. If you wish to dual boot, the OSX partition can go anywhere after the bootstrap partition to insure that yaboot starts first.
Apple Old World machines are a bit more complicated to configure. The first partition is always an Apple Partition Map. This partition keeps track of the layout of the disk. You cannot remove this partition. If you are using BootX, the configuration below assumes that MacOS is installed on a seperate disk. If this is not the case, there will be additional partitions for "Apple Disk Drivers" such as Apple_Driver63, Apple_Driver_ATA, Apple_FWDriver, Apple_Driver_IOKit, Apple_Patches and the MacOS install. If you are using Quik, you will need to create a boot partition to hold the kernel, unlike other Apple boot methods. After the boot partition, the usual Linux filesystems are placed, according to the scheme below. The swap partition is a temporary storage place for when your system runs out of physical memory. The root partition will contain the filesystem that Gentoo is installed on.
The Pegasos partition layout is quite simple compared to the Apple layouts. The first partition is a Boot Partition, which contains kernels to be booted, along with an Open Firmware script that presents a menu on boot. After the boot partition, the usual Linux filesystems are placed, according to the scheme below. The swap partition is a temporary storage place for when your system runs out of physical memory. The root partition will contain the filesystem that Gentoo is installed on.
The IBM PowerPC Reference Platform (PReP) requires a small PReP boot partition on the disk's first partition, followed by the swap and root partitions.
If you are interested in knowing how big a partition should be, or even how many partitions you need, read on. Otherwise continue now with Default: Using mac-fdisk (Apple) to Partition your Disk or Alternative: Using parted (IBM/Pegasos) to Partition your Disk. The number of partitions is highly dependent on your environment. For instance, if you have lots of users, you will most likely want to have your /home separate as it increases security and makes backups easier. If you are installing Gentoo to perform as a mailserver, your /var should be separate as all received mail is stored in /var. A good choice of filesystem will then maximise your performance. Game servers should have a separate /opt as most game servers are installed there. The reason is similar for /home: security and backups. Whatever layout you chose, you will definitely want to keep /usr large: not only will it contain the majority of applications, the Portage tree alone takes more than 500Mb excluding the various sources that are stored in it. As you can see, it very much depends on what you want to achieve. Separate partitions or volumes have the following advantages:
However, multiple partitions have one big disadvantage: if not configured properly, you might result in having a system with lots of free space on one partition and none on another. There is also a 15-partition limit for SCSI and SATA. 4.c. Default: Using mac-fdisk (Apple) Partition your Disk At this point, create your partitions using mac-fdisk:
If you used Apple's Disk Utility to leave space for Linux, first delete the partitions you have created previously to make room for your new install. Use d in mac-fdisk to delete those partition(s). It will ask for the partition number to delete. Usually the first partition on NewWorld machines (Apple_partition_map) could not be deleted. If you would like to start with a clean disk, you can simply initialize the disk by pressing i. This will completely erase the disk, so use this with caution. Second, create an Apple_Bootstrap partition by using b. It will ask for what block you want to start. Enter the number of your first free partition, followed by a p. For instance this is 2p.
Now create a swap partition by pressing c. Again mac-fdisk will ask for what block you want to start this partition from. As we used 2 before to create the Apple_Bootstrap partition, you now have to enter 3p. When you're asked for the size, enter 512M (or whatever size you want -- a minimum of 512MB is recommended, but 2 times your physical memory is the generally accepted size). When asked for a name, enter swap. To create the root partition, enter c, followed by 4p to select from what block the root partition should start. When asked for the size, enter 4p again. mac-fdisk will interpret this as "Use all available space". When asked for the name, enter root. To finish up, write the partition to the disk using w and q to quit mac-fdisk.
Now that your partitions are created, you can continue with Creating Filesystems. 4.d. Using parted to Partition your Disk (Pegasos and RS/6000) parted, the Partition Editor, can now handle HFS+ partitions used by Mac OS and Mac OS X. With this tool you can resize your Mac-partitions and create space for your Linux partitions. Nevertheless, the example below describes partitioning for Pegasos machines only. To begin let's fire up parted:
If the drive is unpartitioned, run mklabel amiga to create a new disklabel for the drive. You can type print at any time in parted to display the current partition table. If at any time you change your mind or made a mistake you can press Ctrl-c to abort parted. If you intend to also install MorphOS on your Pegasos create an affs1 filesystem at the start of the drive. 32MB should be more than enough to store the MorphOS kernel. If you have a Pegasos I or intend to use any filesystem besides ext2 or ext3, you will also have to store your Linux kernel on this partition (the Pegasos II can only boot from ext2/ext3 or affs1 partitions). To create the partition run mkpart primary affs1 START END where START and END should be replaced with the megabyte range (e.g. 0 32) which creates a 32 MB partition starting at 0MB and ending at 32MB. If you chose to create an ext2 or ext3 partition instead, substitute ext2 or ext3 for affs1 in the mkpart command. You will need to create two partitions for Linux, one root filesystem and one swap partition. Run mkpart primary START END to create each partition, replacing START and END with the desired megabyte boundries. It is generally recommended that you create a swap partition that is two times bigger than the amount of RAM in your computer, but at least 512Mb is recommended. To create the swap partition, run mkpart primary linux-swap START END with START and END again denoting the partition boundries. When you are done in parted simply type quit. Now that your partitions are created, it is time to place a filesystem on them. If you're not sure which filesystems to choose and are happy with our defaults, continue with Applying a Filesystem to a Partition. Otherwise, read on to learn about the available filesystems. Several filesystems are available for use on the PowerPC architecture including ext2, ext3, ReiserFS and XFS, each with their strengths and faults. ext2 is the tried and true Linux filesystem but doesn't have metadata journaling, which means that routine ext2 filesystem checks at startup time can be quite time-consuming. There is now quite a selection of journaled filesystems that can be checked for consistency very quickly and are thus generally preferred over their non-journaled counterparts. ext3 is the journaled version of the ext2 filesystem, providing metadata journaling for fast recovery in addition to other enhanced journaling modes like full data and ordered data journaling. It uses an HTree index that enables high performance in almost all situations. In short, ext3 is a very good and reliable filesystem. ReiserFS is a B+tree-based filesystem that has very good overall performance and greatly outperforms both ext2 and ext3 when dealing with small files (files less than 4k), often by a factor of 10x-15x. ReiserFS also scales extremely well and has metadata journaling. ReiserFS is solid and usable as both general-purpose filesystem and for extreme cases such as the creation of large filesystems, very large files and directories containing tens of thousands of small files. XFS is a filesystem with metadata journaling which comes with a robust feature-set and is optimized for scalability. We only recommend using this filesystem on Linux systems with high-end SCSI and/or fibre channel storage and an uninterruptible power supply. Because XFS aggressively caches in-transit data in RAM, improperly designed programs (those that don't take proper precautions when writing files to disk and there are quite a few of them) can lose a good deal of data if the system goes down unexpectedly. mkswap is the command that is used to initialize swap partitions:
To activate the swap partition, use swapon:
Create and activate the swap now before creating other filesystems. Applying a Filesystem to a Partition To create a filesystem on a partition or volume, there are tools available for each possible filesystem:
For instance, to make an ext3 filesystem on the root partition (/dev/hda4 in our example), you would use:
Now create the filesystems on your newly created partitions (or logical volumes).
Now that your partitions are initialized and are housing a filesystem, it is time to mount those partitions. Use the mount command. As an example we mount the root partition:
Continue with Installing the Gentoo Installation Files. 5. Installing the Gentoo Installation Files5.a. Installing a Stage Tarball Before you continue you need to check your date/time and update it. A misconfigured clock may lead to strange results in the future! To verify the current date/time, run date:
If the date/time displayed is wrong, update it using the date MMDDhhmmYYYY syntax (Month, Day, hour, minute and Year). At this stage, you should use UTC time. You will be able to define your timezone later on. For instance, to set the date to March 29th, 16:21 in the year 2005:
5.b. Default: Using a Stage from the Installation CD The stages on the CD reside in the /mnt/cdrom/stages directory. To see a listing of available stages, use ls:
If the system replies with an error, you may need to mount the CD-ROM first:
Now go into your Gentoo mountpoint (usually /mnt/gentoo):
We will now extract the stage tarball of your choice. We will do this with the tar tool. Make sure you use the same options (xvjpf)! The x stands for Extract, the v for Verbose to see what happens during the extraction process (this one is optional), the j for Decompress with bzip2, the p for Preserve permissions and the f to denote that we want to extract a file, not standard input. In the next example, we extract the stage tarball stage3-ppc-2007.0.tar.bz2. Be sure to substitute the tarball filename with your stage.
Now that the stage is installed, continue with Installing Portage. Now unpack your downloaded stage onto your system. We use tar to proceed as it is the easiest method:
Make sure that you use the same options (xvjpf). The x stands for Extract, the v for Verbose to see what happens during the extraction process (this one is optional), the j for Decompress with bzip2, the p for Preserve permissions and the f to denote that we want to extract a file, not standard input. Now that the stage is installed, continue with Installing Portage. You now have to install a Portage snapshot, a collection of files that inform Portage what software titles you can install, which profiles are available, etc. Unpack the Snapshot from the Installation CD To install the snapshot, take a look inside /mnt/cdrom/snapshots/ to see what snapshot is available:
Now extract the snapshot using the following construct. Again, make sure you use the correct options with tar. Also, the -C is with a capital C, not c. In the next example we use portage-<date>.tar.bz2 as the snapshot filename. Be sure to substitute with the name of the snapshot that is on your Installation CD.
You also need to copy over all source code from the Universal Installation CD.
5.d. Configuring the Compile Options To optimize Gentoo, you can set a couple of variables which impact Portage behaviour. All those variables can be set as environment variables (using export) but that isn't permanent. To keep your settings, Portage provides you with /etc/make.conf, a configuration file for Portage. It is this file we will edit now.
Fire up your favorite editor (in this guide we use nano) so we can alter the optimization variables we will discuss hereafter.
As you probably noticed, the make.conf.example file is structured in a generic way: commented lines start with "#", other lines define variables using the VARIABLE="content" syntax. The make.conf file uses the same syntax. Several of those variables are discussed next.
The CHOST variable declares the target build host for your system. This variable should already be set to the correct value. Do not edit it as that might break your system. If the CHOST variable does not look correct to you, you might be using the wrong stage3 tarball. The CFLAGS and CXXFLAGS variables define the optimization flags for the gcc C and C++ compiler respectively. Although we define those generally here, you will only have maximum performance if you optimize these flags for each program separately. The reason for this is because every program is different. In make.conf you should define the optimization flags you think will make your system the most responsive generally. Don't place experimental settings in this variable; too much optimization can make programs behave bad (crash, or even worse, malfunction). We cannot explain all possible optimization options here, but if you want to investigate them all, read the GNU Online Manual(s) or the gcc info page (info gcc -- only works on a working Linux system). For common optimizations and architecture specific settings, please read /etc/make.conf.example. This file also contains lots of examples and information; don't forget to read it too. A first setting is the -march= or -mcpu= flag, which specifies the name of the target architecture. Possible options are described in the make.conf.example file (as comments). A second one is the -O flag (that is a capital O, not a zero), which specifies the gcc optimization class flag. Possible classes are s (for size-optimized), 0 (zero - for no optimizations), 1, 2 or 3 for more speed-optimization flags (every class has the same flags as the one before, plus some extras). -O2 is the recommended default. Another popular optimization flag is -pipe (use pipes rather than temporary files for communication between the various stages of compilation). It has no impact on the generated code. Using -fomit-frame-pointer (which doesn't keep the frame pointer in a register for functions that don't need one) might have serious repercussions on the debugging of applications. When you define the CFLAGS and CXXFLAGS, you should combine several optimization flags. The default values contained in the stage3 archive you unpacked should be good enough. The following example is just an example:
With MAKEOPTS you define how many parallel compilations should occur when you install a package. A good choice is the number of CPUs in your system plus one, but this guideline isn't always perfect.
Update your /mnt/gentoo/etc/make.conf to your own preference and save (nano users would hit Ctrl-X). You are now ready to continue with Chrooting into the Gentoo Base System. 6. Chrooting into the Gentoo Base SystemMounting the /proc and /dev Filesystems Mount the /proc filesystem on /mnt/gentoo/proc to allow the installation to use the kernel-provided information within the chrooted environment, and then mount-bind the /dev filesystem.
Now that all partitions are initialized and the base environment installed, it is time to enter our new installation environment by chrooting into it. This means that we change from the current installation environment to your installation system (namely the initialized partitions). This chrooting is done in three steps. First we will change the root from / (on the installation medium) to /mnt/gentoo (on your partitions) using chroot. Then we will create a new environment using env-update, which essentially creates environment variables. Finally, we load those variables into memory using source.
Congratulations! You are now inside your own Gentoo Linux environment. Of course it is far from finished, which is why the installation still has some sections left :-) You have already installed the Portage tree, but you should now build the Portage cache to speed up future emerges. emerge --metadata does this for you.
6.b. Configuring the USE Variable USE is one of the most powerful variables Gentoo provides to its users. Several programs can be compiled with or without optional support for certain items. For instance, some programs can be compiled with gtk-support, or with qt-support. Others can be compiled with or without SSL support. Some programs can even be compiled with framebuffer support (svgalib) instead of X11 support (X-server). Most distributions compile their packages with support for as much as possible, increasing the size of the programs and startup time, not to mention an enormous amount of dependencies. With Gentoo you can define what options a package should be compiled with. This is where USE comes into play. In the USE variable you define keywords which are mapped onto compile-options. For instance, ssl will compile ssl-support in the programs that support it. -X will remove X-server support (note the minus sign in front). gnome gtk -kde -qt3 -qt4 will compile your programs with gnome (and gtk) support, and not with kde (and qt) support, making your system fully tweaked for GNOME.
The default USE settings are placed in /etc/make.profile/make.defaults. What you place in /etc/make.conf is calculated against these defaults settings. If you add something to the USE setting, it is added to the default list. If you remove something from the USE setting (by placing a minus sign in front of it) it is removed from the default list (if it was in the default list at all). Never alter anything inside the /etc/make.profile directory; it gets overwritten when you update Portage! A full description on USE can be found in the second part of the Gentoo Handbook, USE flags. A full description on the available USE flags can be found on your system in /usr/portage/profiles/use.desc.
As an example we show a USE setting for a KDE-based system with DVD, ALSA and CD Recording support:
7. Configuring the KernelYou first need to select your timezone so that your system knows where it is located. Look for your timezone in /usr/share/zoneinfo, then copy it to /etc/localtime. Please avoid the /usr/share/zoneinfo/Etc/GMT* timezones as their names do not indicate the expected zones. For instance, GMT-8 is in fact GMT+8.
7.b. Installing the Kernel Sources The core around which all distributions are built is the Linux kernel. It is the layer between the user programs and your system hardware. Gentoo provides its users several possible kernels to choose from. A full listing with description is available at the Gentoo Kernel Guide. We suggest using gentoo-sources on PPC, which is a recent 2.6 kernel.
If you take a look in /usr/src you should see a symlink named linux pointing to your current kernel source. In this case, the installed kernel source points to gentoo-sources-2.6.19-r5. Your version may be different, so keep this in mind.
Now it is time to configure and compile your kernel source. You can use genkernel for this, which will build a generic kernel as used by the Installation CD. We explain the "manual" configuration first though, as it is a more efficient configuration. If you want to manually configure your kernel, continue now with Default: Manual Configuration. If you want to use genkernel you should read Alternative: Using genkernel instead. 7.c. Default: Manual Configuration Manually configuring a kernel is often seen as the most difficult procedure a Linux user ever has to perform. Nothing is less true -- after configuring a few kernels you won't even remember that it was difficult ;) However, one thing is true: you must know your system when you start configuring a kernel manually. Most information can be gathered by emerging pciutils (emerge --usepkg pciutils) which contains the program lspci. You will now be able to use lspci within the chrooted environment. You may safely ignore any pcilib warnings (such as pcilib: cannot open /sys/bus/pci/devices) that lspci throws out. Alternatively, you can run lspci from a non-chrooted environment. The results are the same. You can also run lsmod to see what kernel modules the Installation CD uses (it might provide you with a nice hint on what to enable). Another place to look for clues as to what components to enable is to check the kernel message logs from the successful boot that got you this far. Type dmesg to see these kernel messages. Now, go to your kernel source directory, it's time to configure your kernel. Start by configuring a kernel that will boot on most 32 Bit PowerPC machines by first running make pmac32_defconfig. After the default configuration has been generated, run make menuconfig to start an ncurses-based configuration menu.
You will be greeted with several configuration sections. We'll first list some options you must activate (otherwise Gentoo will not function, or not function properly without additional tweaks). First of all, activate the use of development and experimental code/drivers. You need this, otherwise some very important code/drivers won't show up:
Now go to File Systems and select support for the filesystems you use. Don't compile them as modules, otherwise your Gentoo system will not be able to mount your partitions. Also select the /proc file system and Virtual memory. Make sure that you also enable support for Amiga partitions if you are using a Pegasos, or Macintosh partitions if you are using an Apple computer.
Users of NewWorld and OldWorld machines will want HFS support as well. OldWorld users require it for copying compiled kernels to the MacOS partition. NewWorld users require it for configuring the special Apple_Bootstrap partition:
If you are using PPPoE to connect to the Internet or you are using a dial-up modem, you will need the following options in the kernel:
The two compression options won't harm but are not always needed. The PPP over Ethernet option might only be used by ppp when configured to perform kernel mode PPPoE. Don't forget to include support in the kernel for your ethernet card! Most newer Apple computers use the SunGEM ethernet driver. Older iMacs commonly use the BMAC driver.
At this time, full kernel preemption may still be unstable on PPC and may cause compilation failures and random segfaults. It is strongly suggested that you do not use this feature. Both Voluntary Preemption and No Forced Preemption should be safe.
If you're booting from Firewire, you'll need to enable these options. If you do not want to compile in support, you'll need to include these modules and their dependencies in an initrd.
If you're booting from USB, you'll need to enable these options. If you do not want to compile in support, you'll need to include these modules and their dependencies in an initrd.
Do not turn off kernel framebuffer support as it is required for a successful boot. If you are using an NVIDIA based chipset, you should use the Open Firmware framebuffer. If you are using an ATI based chipset, you should select the framebuffer driver based upon your chipset (Mach64, Rage128 or Radeon).
When you're done configuring your kernel, continue with Compiling and Installing. Now that your kernel is configured, it is time to compile and install it. Exit the configuration menu and run the following commands:
When the kernel has finished compiling, copy the kernel image to /boot as shown below. If you have a separate boot partition, as on Pegasos computers, be sure that it is mounted properly. If you are using BootX to boot, we'll copy the kernel later. Yaboot and BootX expect to use an uncompressed kernel unlike many other bootloaders. The uncompressed kernel is called vmlinux and it is placed in /usr/src/linux after the kernel has finished compiling. If you are using a Pegasos machine, the Pegasos firmware requires a compressed kernel called zImage which can be found in /usr/src/linux/arch/powerpc/boot/images.
Now continue with Installing Separate Kernel Modules. 7.d. Installing Separate Kernel Modules You should list the modules you want automatically loaded in /etc/modules.autoload.d/kernel-2.6. You can add extra options to the modules if required. To view all available modules, run the following find command. Don't forget to substitute "<kernel version>" with the version of the kernel you just compiled:
For instance, to automatically load the 3c59x module, edit the kernel-2.6 file and add the module to it, one module on a line.
Continue the installation with Configuring your System. 7.e. Alternative: Using genkernel Now that your kernel source tree is installed, it's now time to compile your kernel by using our genkernel script to automatically build a kernel for you. genkernel works by configuring a kernel nearly identically to the way our Installation CD kernel is configured. This means that when you use genkernel to build your kernel, your system will generally detect all your hardware at boot-time, just like our Installation CD does. Because genkernel doesn't require any manual kernel configuration, it is an ideal solution for those users who may not be comfortable compiling their own kernels. Now, let's see how to use genkernel. First, emerge the genkernel ebuild:
Next, copy over the kernel configuration used by the Installation CD to the location where genkernel looks for the default kernel configuration:
If you are using firewire or USB to boot, you'll need to add modules to the initrd. Edit /usr/share/genkernel/ppc/modules_load and change MODULES_FIREWIRE="ieee1394 ohci1394 sbp2" for firewire support or MODULES_USB="usbcore ohci-hcd ehci-hcd usb-storage" for USB support. Before compiling your sources, the fstab needs a slight adjustment. The rest of the fstab will be completed during a later step, so don't worry about the details now. If you did not create a separate boot partition (NOT bootstrap, that's different), remove the line referencing /boot from /etc/fstab. This will need to be done on most Apple computers.
Now, compile your kernel sources by running genkernel --genzimage all. For Pegasos, we will need to use a different config and create a zImage instead of the vmlinux kernel used on Apple machines. Be aware, as genkernel compiles a kernel that supports almost all hardware, this compilation can take quite a while to finish! Note that, if your partition where the kernel should be located doesn't use ext2 or ext3 as filesystem you might need to manually configure your kernel using genkernel --menuconfig all and add support for your filesystem in the kernel (i.e. not as a module). Users of EVMS2 or LVM2 will probably want to add --evms2 or --lvm2 as an argument as well.
Once genkernel completes, a kernel, full set of modules and initial root disk (initrd) will be created. We will use the kernel and initrd when configuring a boot loader later in this document. Write down the names of the kernel and initrd as you will need them when writing the bootloader configuration file. The initrd will be started immediately after booting to perform hardware autodetection (just like on the Installation CD) before your "real" system starts up. Be sure to also copy down the required boot arguments, these are required for a successful boot with genkernel.
Now continue with Configuring your System. 8. Configuring your SystemUnder Linux, all partitions used by the system must be listed in /etc/fstab. This file contains the mountpoints of those partitions (where they are seen in the file system structure), how they should be mounted and with what special options (automatically or not, whether users can mount them or not, etc.) /etc/fstab uses a special syntax. Every line consists of six fields, separated by whitespace (space(s), tabs or a mixture). Each field has its own meaning:
Add the rules that match your partitioning scheme and append rules for your CD-ROM drive(s), and of course, if you have other partitions or drives, for those too. Now use the example below to create your /etc/fstab:
auto makes mount guess for the filesystem (recommended for removable media as they can be created with one of many filesystems) and user makes it possible for non-root users to mount the CD. To improve performance, most users would want to add the noatime mount option, which results in a faster system since access times aren't registered (you don't need those generally anyway). Double-check your /etc/fstab, save and quit to continue. One of the choices the user has to make is name his/her PC. This seems to be quite easy, but lots of users are having difficulties finding the appropriate name for their Linux-pc. To speed things up, know that any name you choose can be changed afterwards. For all we care, you can just call your system tux and domain homenetwork. We use these values in the next examples. First we set the hostname:
Second, if you need a domainname, set it in /etc/conf.d/net. You only need a domain if your ISP or network administrator says so, or if you have a DNS server but not a DHCP server. You don't need to worry about DNS or domainnames if your networking is setup for DHCP.
If you have a NIS domain (if you don't know what that is, then you don't have one), you need to define that one too:
Before you get that "Hey, we've had that already"-feeling, you should remember that the networking you set up in the beginning of the Gentoo installation was just for the installation. Right now you are going to configure networking for your Gentoo system permanently.
All networking information is gathered in /etc/conf.d/net. It uses a straightforward yet not intuitive syntax if you don't know how to set up networking manually. But don't fear, we'll explain everything. A fully commented example that covers many different configurations is available in /etc/conf.d/net.example. DHCP is used by default and does not require any further configuration. If you need to configure your network connection either because you need specific DHCP options or because you do not use DHCP at all, open /etc/conf.d/net with your favorite editor (nano is used in this example):
You will see the following file:
To enter your own IP address, netmask and gateway, you need to set both config_eth0 and routes_eth0:
To use DHCP and add specific DHCP options, define config_eth0 and dhcp_eth0:
Please read /etc/conf.d/net.example for a list of all available options. If you have several network interfaces repeat the above steps for config_eth1, config_eth2, etc. Now save the configuration and exit to continue. Automatically Start Networking at Boot To have your network interfaces activated at boot, you need to add them to the default runlevel.
If you have several network interfaces, you need to create the appropriate net.eth1, net.eth2 etc. initscripts for those. You can use ln to do this:
Writing Down Network Information You now need to inform Linux about your network. This is defined in /etc/hosts and helps in resolving hostnames to IP addresses for hosts that aren't resolved by your nameserver. You need to define your system. You may also want to define other systems on your network if you don't want to set up your own internal DNS system.
Save and exit the editor to continue. If you don't have PCMCIA, you can now continue with System Information. PCMCIA-users should read the following topic on PCMCIA. PCMCIA users should first install the pcmciautils package.
First we set the root password by typing:
If you want root to be able to log on through the serial console, add tts/0 to /etc/securetty:
Gentoo uses /etc/rc.conf for general, system-wide configuration. Open up /etc/rc.conf and enjoy all the comments in that file :)
When you're finished configuring /etc/rc.conf, save and exit. As you can see, this file is well commented to help you set up the necessary configuration variables. You can configure your system to use unicode and define your default editor and your display manager (like gdm or kdm). Gentoo uses /etc/conf.d/keymaps to handle keyboard configuration. Edit it to configure your keyboard.
Take special care with the KEYMAP variable. If you select the wrong KEYMAP, you will get weird results when typing on your keyboard.
When you're finished configuring /etc/conf.d/keymaps, save and exit. Gentoo uses /etc/conf.d/clock to set clock options. Edit it according to your needs.
If your hardware clock is not using UTC, you need to add CLOCK="local" to the file. Otherwise you will notice some clock skew. You should define the timezone that you previously copied to /etc/localtime so that further upgrades of the sys-libs/timezone-data package can update /etc/localtime automatically. For instance, if you used the GMT timezone, you would add TIMEZONE="GMT" When you're finished configuring /etc/conf.d/clock, save and exit. Please continue with Installing Necessary System Tools. 9. Installing Necessary System ToolsSome tools are missing from the stage3 archive because several packages provide the same functionality. It is now up to you to choose which ones you want to install. The first tool you need to decide on has to provide logging facilities for your system. Unix and Linux have an excellent history of logging capabilities -- if you want you can log everything that happens on your system in logfiles. This happens through the system logger. Gentoo offers several system loggers to choose from. There are sysklogd, which is the traditional set of system logging daemons, syslog-ng, an advanced system logger, and metalog which is a highly-configurable system logger. Others might be available through Portage as well - our number of available packages increases on a daily basis. If you plan on using sysklogd or syslog-ng you might want to install logrotate afterwards as those system loggers don't provide any rotation mechanism for the log files. To install the system logger of your choice, emerge it and have it added to the default runlevel using rc-update. The following example installs syslog-ng. Of course substitute with your system logger:
Next is the cron daemon. Although it is optional and not required for your system, it is wise to install one. But what is a cron daemon? A cron daemon executes scheduled commands. It is very handy if you need to execute some command regularly (for instance daily, weekly or monthly). We only provide vixie-cron for networkless installations. If you want another cron daemon you can wait and install it later on.
If you want to index your system's files so you are able to quickly locate them using the locate tool, you need to install sys-apps/slocate.
Depending on what file systems you are using, you need to install the necessary file system utilities (for checking the filesystem integrity, creating additional file systems etc.). The following table lists the tools you need to install if you use a certain file system. Not all filesystems are available for each and every architecture though.
If you are an EVMS user, you need to install emvs:
The USE="-gtk" will prevent the installation of dependencies. If you want to enable the evms graphical tools, you can recompile evms later on. Optional: RAID utilities for IBM hardware If you are using SCSI RAID on a POWER5-based system, you should consider installing the iprutils which will allow you to work with the RAID disk array, get status on the disks in the arrays, and update microcode among other functions.
If you don't require any additional networking-related tools (such as ppp or a dhcp client) continue with Configuring the Bootloader. Optional: Installing a DHCP Client If you require Gentoo to automatically obtain an IP address for your network interface(s), you need to install dhcpcd (or any other DHCP Client) on your system. If you don't do this now, you might not be able to connect to the internet after the installation!
Optional: Installing a PPPoE Client If you need ppp to connect to the net, you need to install it.
Now continue with Configuring the Bootloader. 10. Configuring the BootloaderNow that the kernel is configured and compiled, you'll need a bootloader to start your new linux installation. The bootloader that you use will depend upon the type of PPC machine you have. If you are using a NewWorld Apple or IBM machine, you need to use yaboot. OldWorld Apple machines have two options, BootX (recommended) and quik. The Pegasos does not require a bootloader, but you will need to emerge bootcreator to create SmartFirmware boot menus.
In order to find the boot devices, yaboot needs access to the device nodes created by udev on startup and the sysfs filesystem. These two filesystems are found at /dev and sys respectively. To do this, you will need to "bind mount" these filesystems from the Installation CD's root to the /dev and /sys mount points inside the chroot. If you have already bind mounted these filesystems, there is no need to do it again.
To set up yaboot, you can use yabootconfig to automatically create a configuration file for you. If you are installing Gentoo on a G5 (where yabootconfig does not always work), or you plan to boot from firewire or USB, you will need to manually configure yaboot.
yabootconfig will auto-detect the partitions on your machine and will set up dual and triple boot combinations with Linux, Mac OS, and Mac OS X. To use yabootconfig, your drive must have an Apple_Bootstrap partition, and /etc/fstab must be configured to reflect your Linux partitions (note that the Bootstrap partition should not be in your fstab). These steps should have already been completed before, but check /etc/fstab before proceeding. Now, install yaboot.
Now exit the chroot and run yabootconfig --chroot /mnt/gentoo. First, the program will confirm the location of the bootstrap partition. If you are using the suggested disk partitioning scheme, your bootstrap partition should be /dev/hda2. Type Y if the output is correct. If not, double check your /etc/fstab. yabootconfig will then scan your system setup, create /etc/yaboot.conf and run mkofboot for you. mkofboot is used to format the Apple_Bootstrap partition, and install the yaboot configuration file into it. After this enter the chroot again.
You should verify the contents of /etc/yaboot.conf. If you make changes to /etc/yaboot.conf (like setting the default/boot OS), make sure to rerun ybin -v to apply changes to the Apple_Bootstrap partition. Whenever you make a change to yaboot.conf, like when testing a new kernel, always remember to run ybin -v to update the bootstrap partition. Now continue with Rebooting the System. Alternative: Manual yaboot Configuration First, install yaboot on your system:
An example yaboot.conf file is given below, but you will need to alter it to fit your needs. G5 users and users booting from firewire and USB should be aware that their disks are seen as SCSI disks by the Linux kernel, so you will need to substitute /dev/hda with /dev/sda).
Once yaboot.conf is configured, run mkofboot -v to format the Apple_bootstrap partition and install the settings. If you change yaboot.conf after the Apple_bootstrap partition has been created, you can update the settings by running ybin -v
For more information on yaboot, take a look at the yaboot project. For now, continue the installation with Rebooting the System.
Since BootX boots Linux from within MacOS, the kernel will need to be copied from the Linux Partition to the MacOS partition. First, mount the MacOS partition from outside of the chroot. Use mac-fdisk -l to find the MacOS partition number, sda6 is used as an example here. Once the partition is mounted, we'll copy the kernel to the system folder so BootX can find it.
If genkernel is used, both the kernel and initrd will need to be copied to the MacOS partition.
Now that the kernel is copied over, we'll need to reboot to set up BootX.
Of course, don't forget to remove the bootable CD, otherwise the CD will be booted again instead of MacOS. Once the machine has booted into MacOS, open the BootX control panel. If you're not using genkernel, select Options and uncheck Use specified RAM disk. If you are using genkernel, ensure that the genkernel initrd is selected instead of the Installation CD initrd. If not using genkernel, there is now an option to specify the machine's Linux root disk and partition. Fill these in with the appropriate values. Depending upon the kernel configuration, additional boot arguments may need to be applied. BootX can be configured to start Linux upon boot. If you do this, you will first see your machine boot into MacOS then, during startup, BootX will load and start Linux. See the BootX home page for more information.
Now reboot again and boot into Linux, then continue with Finalizing your Gentoo Installation. quik allows OldWorld Macs to boot without MacOS. However, it isn't well supported and has a number of quirks. If you have the option, it is recommended that you use BootX instead since it is much more reliable and easier to set up than quik. First, we'll need to install quik:
Next, we'll need to set it up. Edit /etc/quik.conf and set your image to the kernel that we copied to your boot partition.
Your quik.conf file must be on the same disk as the quik boot images, however it can be on a different partition on the same disk, although it is recommended to move it to your boot partition.
We will now set your boot variables so that quik loads on boot. To do this, we'll use a program called nvsetenv. The variables that you want to set vary from machine to machine, it's best to find your machine's quirks before attempting this.
Now that we've set up our machine to boot, we'll need to make sure the boot images are installed correctly. Run quik -v -C /boot/quik.conf. It should tell you that it has installed the first stage QUIK boot block.
Now, continue the installation with Rebooting the System. 10.e. Alternative: BootCreator
First make sure you have bootcreator installed on your system:
Now copy the file /etc/bootmenu.example into /etc/bootmenu and edit it to suit your needs:
Below is a complete /etc/bootmenu config file. vmlinux and initrd should be replaced by your kernel and initrd image names.
Finally the bootmenu must be transferred into Forth and copied to your boot partition, so that the SmartFirmware can read it. Therefore you have to call bootcreator:
For now, continue the installation with Rebooting the System. Exit the chrooted environment and unmount all mounted partitions. Then type in that one magical command you have been waiting for: reboot.
Once rebooted in your Gentoo installation, finish up with Finalizing your Gentoo Installation. 11. Finalizing your Gentoo InstallationWorking as root on a Unix/Linux system is dangerous and should be avoided as much as possible. Therefore it is strongly recommended to add a user for day-to-day use. The groups the user is member of define what activities the user can perform. The following table lists a number of important groups you might wish to use:
For instance, to create a user called john who is member of the wheel, users and audio groups, log in as root first (only root can create users) and run useradd:
If a user ever needs to perform some task as root, they can use su - to temporarily receive root privileges. Another way is to use the sudo package which is, if correctly configured, very secure. 11.b. Optional: Install GRP Packages
Now that your system is booted, log on as the user you created (for instance, john) and use su - to gain root privileges:
Now we need to change the Portage configuration to look for the prebuilt binaries from the second CD (Gentoo Packages CD). First mount this CD:
Now configure Portage to use /mnt/cdrom for its prebuilt packages:
Now install the packages you want. The Packages CD contains several prebuilt binaries, for instance KDE and GNOME.
To find out what prebuilt packages are available, do a quick listing of all the files in /mnt/cdrom/All. For instance, to find out if KDE is emergeable:
Be sure to install the binaries now. When you do an emerge --sync to update Portage (as you will learn later), the prebuilt binaries might not match against the ebuilds in your updated Portage. You can try to circumvent this by using emerge --usepkgonly instead of emerge --usepkg. Congratulations, your system is now fully equipped! Continue with Where to go from here? to learn more about Gentoo. 12. Where to go from here?Congratulations! You now have a working Gentoo system. But where to go from here? What are your options now? What to explore first? Gentoo provides its users with lots of possibilities, and therefore lots of documented (and less documented) features. You should definitely take a look at the next part of the Gentoo Handbook entitled Working with Gentoo which explains how to keep your software up to date, how to install more software, what USE flags are, how the Gentoo Init system works, etc. If you are interested in optimizing your system for desktop use, or you want to learn how to configure your system to be a full working desktop system, consult our extensive Gentoo Desktop Documentation Resources. Besides, you might want to use our localization guide to make your system feel more at home. We also have a Gentoo Security Handbook which is worth reading. For a full listing of all our available documentation check out our Documentation Resources page. You are of course always welcome on our Gentoo Forums or on one of our many Gentoo IRC channels. We also have several mailinglists open to all our users. Information on how to join is contained in that page. We'll shut up now and let you enjoy your installation :) 12.c. Gentoo Changes since 2007.0 Gentoo is a fast-moving target. The following sections describe important changes that affect a Gentoo installation. We only list those that have anything in common with the installation, not with package changes that did not occur during the installation. There have been no significant changes since. B. Working with Gentoo1. A Portage IntroductionPortage is probably Gentoo's most notable innovation in software management. With its high flexibility and enormous amount of features it is frequently seen as the best software management tool available for Linux. Portage is completely written in Python and Bash and therefore fully visible to the users as both are scripting languages. Most users will work with Portage through the emerge tool. This chapter is not meant to duplicate the information available from the emerge man page. For a complete rundown of emerge's options, please consult the man page:
When we talk about packages, we often mean software titles that are available to the Gentoo users through the Portage tree. The Portage tree is a collection of ebuilds, files that contain all information Portage needs to maintain software (install, search, query, ...). These ebuilds reside in /usr/portage by default. Whenever you ask Portage to perform some action regarding software titles, it will use the ebuilds on your system as a base. It is therefore important that you regularly update the ebuilds on your system so Portage knows about new software, security updates, etc. The Portage tree is usually updated with rsync, a fast incremental file transfer utility. Updating is fairly simple as the emerge command provides a front-end for rsync:
If you are unable to rsync due to firewall restrictions you can still update your Portage tree by using our daily generated Portage tree snapshots. The emerge-webrsync tool automatically fetches and installs the latest snapshot on your system:
To search through the Portage tree after software titles, you can use emerge built-in search capabilities. By default, emerge --search returns the names of packages whose title matches (either fully or partially) the given search term. For instance, to search for all packages who have "pdf" in their name:
If you want to search through the descriptions as well you can use the --searchdesc (or -S) switch:
When you take a look at the output, you'll notice that it gives you a lot of information. The fields are clearly labelled so we won't go further into their meanings:
Once you've found a software title to your liking, you can easily install it with emerge: just add the package name. For instance, to install gnumeric:
Since many applications depend on each other, any attempt to install a certain software package might result in the installation of several dependencies as well. Don't worry, Portage handles dependencies well. If you want to find out what Portage would install when you ask it to install a certain package, add the --pretend switch. For instance:
When you ask Portage to install a package, it will download the necessary source code from the internet (if necessary) and store it by default in /usr/portage/distfiles. After this it will unpack, compile and install the package. If you want Portage to only download the sources without installing them, add the --fetchonly option to the emerge command:
Finding Installed Package Documentation Many packages come with their own documentation. Sometimes, the doc USE flag determines whether the package documentation should be installed or not. You can check the existence of a doc USE flag with the emerge -vp <package name> command.
The best way of enabling the doc USE flag is doing it on a per-package basis via /etc/portage/package.use, so that you get documentation only for packages that you are interested in. Enabling this flag globally is known to cause problems with circular dependencies. For more information, please read the USE Flags chapter. Once the package installed, its documentation is generally found in a subdirectory named after the package under the /usr/share/doc directory. You can also list all installed files with the equery tool which is part of the app-portage/gentoolkit package.
When you want to remove a software package from your system, use emerge --unmerge. This will tell Portage to remove all files installed by that package from your system except the configuration files of that application if you have altered those after the installation. Leaving the configuration files allows you to continue working with the package if you ever decide to install it again. However, a big warning applies: Portage will not check if the package you want to remove is required by another package. It will however warn you when you want to remove an important package that breaks your system if you unmerge it.
When you remove a package from your system, the dependencies of that package that were installed automatically when you installed the software are left. To have Portage locate all dependencies that can now be removed, use emerge's --depclean functionality. We will talk about this later on. To keep your system in perfect shape (and not to mention install the latest security updates) you need to update your system regularly. Since Portage only checks the ebuilds in your Portage tree you first have to update your Portage tree. When your Portage tree is updated, you can update your system with emerge --update world. In the next example, we'll also use the --ask switch which will tell Portage to display the list of packages it wants to upgrade and ask you if you want to continue:
Portage will then search for newer version of the applications you have installed. However, it will only verify the versions for the applications you have explicitly installed (the applications listed in /var/lib/portage/world) - it does not thoroughly check their dependencies. If you want to update every single package on your system, add the --deep argument:
Since security updates also happen in packages you have not explicitly installed on your system (but that are pulled in as dependencies of other programs), it is recommended to run this command once in a while. If you have altered any of your USE flags lately you might want to add --newuse as well. Portage will then verify if the change requires the installation of new packages or recompilation of existing ones:
Some packages in the Portage tree don't have any real content but are used to install a collection of packages. For instance, the kde package will install a complete KDE environment on your system by pulling in various KDE-related packages as dependencies. If you ever want to remove such a package from your system, running emerge --unmerge on the package won't have much effect as the dependencies remain on the system. Portage has the functionality to remove orphaned dependencies as well, but since the availability of software is dynamically dependent you first need to update your entire system fully, including the new changes you applied when changing USE flags. After this you can run emerge --depclean to remove the orphaned dependencies. When this is done, you need to rebuild the applications that were dynamically linked to the now-removed software titles but don't require them anymore. All this is handled with the following three commands:
revdep-rebuild is provided by the gentoolkit package; don't forget to emerge it first:
1.d. When Portage is Complaining... About SLOTs, Virtuals, Branches, Architectures and Profiles As we stated before, Portage is extremely powerful and supports many features that other software management tools lack. To understand this, we explain a few aspects of Portage without going into too much detail. With Portage different versions of a single package can coexist on a system. While other distributions tend to name their package to those versions (like freetype and freetype2) Portage uses a technology called SLOTs. An ebuild declares a certain SLOT for its version. Ebuilds with different SLOTs can coexist on the same system. For instance, the freetype package has ebuilds with SLOT="1" and SLOT="2". There are also packages that provide the same functionality but are implemented differently. For instance, metalogd, sysklogd and syslog-ng are all system loggers. Applications that rely on the availability of "a system logger" cannot depend on, for instance, metalogd, as the other system loggers are as good a choice as any. Portage allows for virtuals: each system logger provides virtual/syslog so that applications can depend on virtual/syslog. Software in the Portage tree can reside in different branches. By default your system only accepts packages that Gentoo deems stable. Most new software titles, when committed, are added to the testing branch, meaning more testing needs to be done before it is marked as stable. Although you will see the ebuilds for those software in the Portage tree, Portage will not update them before they are placed in the stable branch. Some software is only available for a few architectures. Or the software doesn't work on the other architectures, or it needs more testing, or the developer that committed the software to the Portage tree is unable to verify if the package works on different architectures. Each Gentoo installation adheres to a certain profile which contains, amongst other information, the list of packages that are required for a system to function normally.
Ebuilds contain specific fields that inform Portage about its dependencies. There are two possible dependencies: build dependencies, declared in DEPEND and run-time dependencies, declared in RDEPEND. When one of these dependencies explicitly marks a package or virtual as being not compatible, it triggers a blockage. To fix a blockage, you can choose to not install the package or unmerge the conflicting package first. In the given example, you can opt not to install postfix or to remove ssmtp first. You may also see blocking packages with specific atoms, such as <media-video/mplayer-bin-1.0_rc1-r2. In this case, updating to a more recent version of the blocking package would remove the block. It is also possible that two packages that are yet to be installed are blocking each other. In this rare case, you should find out why you need to install both. In most cases you can do with one of the packages alone. If not, please file a bug on Gentoo's bugtracking system.
When you want to install a package that isn't available for your system, you will receive this masking error. You should try installing a different application that is available for your system or wait until the package is put available. There is always a reason why a package is masked:
The application you are trying to install depends on another package that is not available for your system. Please check bugzilla if the issue is known and if not, please report it. Unless you are mixing branches this should not occur and is therefore a bug.
The application you want to install has a name that corresponds with more than one package. You need to supply the category name as well. Portage will inform you of possible matches to choose from.
Two (or more) packages you want to install depend on each other and can therefore not be installed. This is most likely a bug in the Portage tree. Please resync after a while and try again. You can also check bugzilla if the issue is known and if not, report it.
Portage was unable to download the sources for the given application and will try to continue installing the other applications (if applicable). This failure can be due to a mirror that has not synchronised correctly or because the ebuild points to an incorrect location. The server where the sources reside can also be down for some reason. Retry after one hour to see if the issue still persists.
You have asked to remove a package that is part of your system's core packages. It is listed in your profile as required and should therefore not be removed from the system. Sometimes, when you attempt to emerge a package, it will fail with the message:
This is a sign that something is wrong with the Portage tree -- often, it is because a developer may have made a mistake when committing a package to the tree. When the digest verification fails, do not try to re-digest the package yourself. Running ebuild foo manifest will not fix the problem; it will almost certainly make it worse! Instead, wait an hour or two for the tree to settle down. It's likely that the error was noticed right away, but it can take a little time for the fix to trickle down the Portage tree. While you're waiting, check Bugzilla and see if anyone has reported the problem yet. If not, go ahead and file a bug for the broken package. Once you see that the bug has been fixed, you may want to re-sync to pick up the fixed digest.
2. USE flagsWhen you are installing Gentoo (or any other distribution, or even operating system for that matter) you make choices depending on the environment you are working with. A setup for a server differs from a setup for a workstation. A gaming workstation differs from a 3D rendering workstation. This is not only true for choosing what packages you want to install, but also what features a certain package should support. If you don't need OpenGL, why would you bother installing OpenGL and build OpenGL support in most of your packages? If you don't want to use KDE, why would you bother compiling packages with KDE support if those packages work flawlessly without? To help users in deciding what to install/activate and what not, we wanted the user to specify his/her environment in an easy way. This forces the user into deciding what they really want and eases the process for Portage, our package management system, to make useful decisions. Enter the USE flags. Such a flag is a keyword that embodies support and dependency-information for a certain concept. If you define a certain USE flag, Portage will know that you want support for the chosen keyword. Of course this also alters the dependency information for a package. Let us take a look at a specific example: the kde keyword. If you do not have this keyword in your USE variable, all packages that have optional KDE support will be compiled without KDE support. All packages that have an optional KDE dependency will be installed without installing the KDE libraries (as dependency). If you have defined the kde keyword, then those packages will be compiled with KDE support, and the KDE libraries will be installed as dependency. By correctly defining the keywords you will receive a system tailored specifically to your needs. There are two types of USE flags: global and local USE flags.
A list of available global USE flags can be found online or locally in /usr/portage/profiles/use.desc. A list of available local USE flags can be found locally in /usr/portage/profiles/use.local.desc. In the hope you are convinced of the importance of USE flags we will now inform you how to declare USE flags. As previously mentioned, all USE flags are declared inside the USE variable. To make it easy for users to search and pick USE flags, we already provide a default USE setting. This setting is a collection of USE flags we think are commonly used by the Gentoo users. This default setting is declared in the make.defaults files part of your profile. The profile your system listens to is pointed to by the /etc/make.profile symlink. Each profile works on top of another, larger profile, the end result is therefore the sum of all profiles. The top profile is the base profile (/usr/portage/profiles/base). Let us take a look at this default setting for the 2004.3 profile:
As you can see, this variable already contains quite a lot of keywords. Do not alter any make.defaults file to tailor the USE variable to your needs: changes in this file will be undone when you update Portage! To change this default setting, you need to add or remove keywords to the USE variable. This is done globally by defining the USE variable in /etc/make.conf. In this variable you add the extra USE flags you require, or remove the USE flags you don't want. This latter is done by prefixing the keyword with the minus-sign ("-"). For instance, to remove support for KDE and QT but add support for ldap, the following USE can be defined in /etc/make.conf:
Declaring USE flags for individual packages Sometimes you want to declare a certain USE flag for one (or a couple) of applications but not system-wide. To accomplish this, you will need to create the /etc/portage directory (if it doesn't exist yet) and edit /etc/portage/package.use. This is usually a single file, but can also be a directory; see man portage for more information. The following examples assume package.use is a single file. For instance, if you don't want berkdb support globally but you do want it for mysql, you would add:
You can of course also explicitly disable USE flags for a certain application. For instance, if you don't want java support in PHP:
Sometimes you want to set a certain USE setting only once. Instead of editing /etc/make.conf twice (to do and undo the USE changes) you can just declare the USE variable as environment variable. Remember that, when you re-emerge or update this application (either explicitly or as part of a system update) your changes will be lost! As an example we will temporarily remove java from the USE setting during the installation of seamonkey.
Of course there is a certain precedence on what setting has priority over the USE setting. You don't want to declare USE="-java" only to see that java is still used due to a setting that has a higher priority. The precedence for the USE setting is, ordered by priority (first has lowest priority):
To view the final USE setting as seen by Portage, run emerge --info. This will list all relevant variables (including the USE variable) with the content used by Portage.
Adapting your Entire System to New USE Flags If you have altered your USE flags and you wish to update your entire system to use the new USE flags, use emerge's --newuse option:
Next, run Portage's depclean to remove the conditional dependencies that were emerged on your "old" system but that have been obsoleted by the new USE flags.
When depclean has finished, run revdep-rebuild to rebuild the applications that are dynamically linked against shared objects provided by possibly removed packages. revdep-rebuild is part of the gentoolkit package; don't forget to emerge it first.
When all this is accomplished, your system is using the new USE flag settings. 2.c. Package specific USE flags Let us take the example of seamonkey: what USE flags does it listen to? To find out, we use emerge with the --pretend and --verbose options:
emerge isn't the only tool for this job. In fact, we have a tool dedicated to package information called equery which resides in the gentoolkit package. First, install gentoolkit:
Now run equery with the uses argument to view the USE flags of a certain package. For instance, for the gnumeric package:
3. Portage FeaturesPortage has several additional features that makes your Gentoo experience even better. Many of these features rely on certain software tools that improve performance, reliability, security, ... To enable or disable certain Portage features you need to edit /etc/make.conf's FEATURES variable which contains the various feature keywords, separated by white space. In several cases you will also need to install the additional tool on which the feature relies. Not all features that Portage supports are listed here. For a full overview, please consult the make.conf man page:
To find out what FEATURES are default set, run emerge --info and search for the FEATURES variable or grep it out:
distcc is a program to distribute compilations across several, not necessarily identical, machines on a network. The distcc client sends all necessary information to the available distcc servers (running distccd) so they can compile pieces of source code for the client. The net result is a faster compilation time. You can find more information about distcc (and how to have it work with Gentoo) in our Gentoo Distcc Documentation. Distcc ships with a graphical monitor to monitor tasks that your computer is sending away for compilation. If you use Gnome then put 'gnome' in your USE variable. However, if you don't use Gnome and would still like to have the monitor then you should put 'gtk' in your USE variable.
Add distcc to the FEATURES variable inside /etc/make.conf. Next, edit the MAKEOPTS variable to your liking. A known guideline is to fill in "-jX" with X the number of CPUs that run distccd (including the current host) plus one, but you might have better results with other numbers. Now run distcc-config and enter the list of available distcc servers. For a simple example we assume that the available DistCC servers are 192.168.1.102 (the current host), 192.168.1.103 and 192.168.1.104 (two "remote" hosts):
Don't forget to run the distccd daemon as well:
ccache is a fast compiler cache. When you compile a program, it will cache intermediate results so that, whenever you recompile the same program, the compilation time is greatly reduced. In common compilations this can result in 5 to 10 times faster compilation times. If you are interested in the ins and outs of ccache, please visit the ccache homepage. To install ccache, run emerge ccache:
Open /etc/make.conf and add ccache to the FEATURES variable. Next, add a new variable called CCACHE_SIZE and set it to "2G":
To check if ccache functions, ask ccache to provide you with its statistics. Because Portage uses a different ccache home directory, you need to set the CCACHE_DIR variable as well:
The /var/tmp/ccache location is Portage' default ccache home directory; if you want to alter this setting you can set the CCACHE_DIR variable in /etc/make.conf. However, if you would run ccache, it would use the default location of ${HOME}/.ccache, which is why you needed to set the CCACHE_DIR variable when asking for the (Portage) ccache statistics. Using ccache for non-Portage C Compiling If you would like to use ccache for non-Portage compilations, add /usr/lib/ccache/bin to the beginning of your PATH variable (before /usr/bin). This can be accomplished by editing .bash_profile in your user's home directory. Using .bash_profile is one way to define PATH variables.
Portage supports the installation of prebuilt packages. Even though Gentoo does not provide prebuilt packages by itself (except for the GRP snapshots) Portage can be made fully aware of prebuilt packages. To create a prebuilt package you can use quickpkg if the package is already installed on your system, or emerge with the --buildpkg or --buildpkgonly options. If you want Portage to create prebuilt packages of every single package you install, add buildpkg to the FEATURES variable. More extended support for creating prebuilt package sets can be obtained with catalyst. For more information on catalyst please read the Catalyst Frequently Asked Questions. Although Gentoo doesn't provide one, you can create a central repository where you store prebuilt packages. If you want to use this repository, you need to make Portage aware of it by having the PORTAGE_BINHOST variable point to it. For instance, if the prebuilt packages are on ftp://buildhost/gentoo:
When you want to install a prebuilt package, add the --getbinpkg option to the emerge command alongside of the --usepkg option. The former tells emerge to download the prebuilt package from the previously defined server while the latter asks emerge to try to install the prebuilt package first before fetching the sources and compiling it. For instance, to install gnumeric with prebuilt packages:
More information about emerge's prebuilt package options can be found in the emerge man page:
When you are emerging a series of packages, Portage can fetch the source files for the next package in the list even while it is compiling another package, thus shortening compile times. To make use of this capability, add "parallel-fetch" to your FEATURES. When Portage is run as root, FEATURES="userfetch" will allow Portage to drop root privileges while fetching package sources. This is a small security improvement. 4. InitscriptsWhen you boot your system, you will notice lots of text floating by. If you pay close attention, you will notice this text is the same every time you reboot your system. The sequence of all these actions is called the boot sequence and is (more or less) statically defined. First, your boot loader will load the kernel image you have defined in the boot loader configuration into memory after which it tells the CPU to run the kernel. When the kernel is loaded and run, it initializes all kernel-specific structures and tasks and starts the init process. This process then makes sure that all filesystems (defined in /etc/fstab) are mounted and ready to be used. Then it executes several scripts located in /etc/init.d, which will start the services you need in order to have a successfully booted system. Finally, when all scripts are executed, init activates the terminals (in most cases just the virtual consoles which are hidden beneath Alt-F1, Alt-F2, etc.) attaching a special process called agetty to it. This process will then make sure you are able to log on through these terminals by running login. Now init doesn't just execute the scripts in /etc/init.d randomly. Even more, it doesn't run all scripts in /etc/init.d, only the scripts it is told to execute. It decides which scripts to execute by looking into /etc/runlevels. First, init runs all scripts from /etc/init.d that have symbolic links inside /etc/runlevels/boot. Usually, it will start the scripts in alphabetical order, but some scripts have dependency information in them, telling the system that another script must be run before they can be started. When all /etc/runlevels/boot referenced scripts are executed, init continues with running the scripts that have a symbolic link to them in /etc/runlevels/default. Again, it will use the alphabetical order to decide what script to run first, unless a script has dependency information in it, in which case the order is changed to provide a valid start-up sequence. Of course init doesn't decide all that by itself. It needs a configuration file that specifies what actions need to be taken. This configuration file is /etc/inittab. If you remember the boot sequence we have just described, you will remember that init's first action is to mount all filesystems. This is defined in the following line from /etc/inittab:
This line tells init that it must run /sbin/rc sysinit to initialize the system. The /sbin/rc script takes care of the initialisation, so you might say that init doesn't do much -- it delegates the task of initialising the system to another process. Second, init executed all scripts that had symbolic links in /etc/runlevels/boot. This is defined in the following line:
Again the rc script performs the necessary tasks. Note that the option given to rc (boot) is the same as the subdirectory of /etc/runlevels that is used. Now init checks its configuration file to see what runlevel it should run. To decide this, it reads the following line from /etc/inittab:
In this case (which the majority of Gentoo users will use), the runlevel id is 3. Using this information, init checks what it must run to start runlevel 3:
The line that defines level 3, again, uses the rc script to start the services (now with argument default). Again note that the argument of rc is the same as the subdirectory from /etc/runlevels. When rc has finished, init decides what virtual consoles it should activate and what commands need to be run at each console:
You have seen that init uses a numbering scheme to decide what runlevel it should activate. A runlevel is a state in which your system is running and contains a collection of scripts (runlevel scripts or initscripts) that must be executed when you enter or leave a runlevel. In Gentoo, there are seven runlevels defined: three internal runlevels, and four user-defined runlevels. The internal runlevels are called sysinit, shutdown and reboot and do exactly what their names imply: initialize the system, powering off the system and rebooting the system. The user-defined runlevels are those with an accompanying /etc/runlevels subdirectory: boot, default, nonetwork and single. The boot runlevel starts all system-necessary services which all other runlevels use. The remaining three runlevels differ in what services they start: default is used for day-to-day operations, nonetwork is used in case no network connectivity is required, and single is used when you need to fix the system. The scripts that the rc process starts are called init scripts. Each script in /etc/init.d can be executed with the arguments start, stop, restart, pause, zap, status, ineed, iuse, needsme, usesme or broken. To start, stop or restart a service (and all depending services), start, stop and restart should be used:
If you want to stop a service, but not the services that depend on it, you can use the pause argument:
If you want to see what status a service has (started, stopped, paused, ...) you can use the status argument:
If the status information tells you that the service is running, but you know that it is not, then you can reset the status information to "stopped" with the zap argument:
To also ask what dependencies the service has, you can use iuse or ineed. With ineed you can see the services that are really necessary for the correct functioning of the service. iuse on the other hand shows the services that can be used by the service, but are not necessary for the correct functioning.
Similarly, you can ask what services require the service (needsme) or can use it (usesme):
Finally, you can ask what dependencies the service requires that are missing:
Gentoo's init system uses a dependency-tree to decide what service needs to be started first. As this is a tedious task that we wouldn't want our users to have to do manually, we have created tools that ease the administration of the runlevels and init scripts. With rc-update you can add and remove init scripts to a runlevel. The rc-update tool will then automatically ask the depscan.sh script to rebuild the dependency tree. You have already added init scripts to the "default" runlevel during the installation of Gentoo. At that time you might not have had a clue what the "default" is for, but now you should. The rc-update script requires a second argument that defines the action: add, del or show. To add or remove an init script, just give rc-update the add or del argument, followed by the init script and the runlevel. For instance:
The rc-update -v show command will show all the available init scripts and list at which runlevels they will execute:
You can also run rc-update show (without -v) to just view enabled init scripts and their runlevels. Why the Need for Extra Configuration? Init scripts can be quite complex. It is therefore not really desirable to have the users edit the init script directly, as it would make it more error-prone. It is however important to be able to configure such a service. For instance, you might want to give more options to the service itself. A second reason to have this configuration outside the init script is to be able to update the init scripts without the fear that your configuration changes will be undone. Gentoo provides an easy way to configure such a service: every init script that can be configured has a file in /etc/conf.d. For instance, the apache2 initscript (called /etc/init.d/apache2) has a configuration file called /etc/conf.d/apache2, which can contain the options you want to give to the Apache 2 server when it is started:
Such a configuration file contains variables and variables alone (just like /etc/make.conf), making it very easy to configure services. It also allows us to provide more information about the variables (as comments). No, writing an init script is usually not necessary as Gentoo provides ready-to-use init scripts for all provided services. However, you might have installed a service without using Portage, in which case you will most likely have to create an init script. Do not use the init script provided by the service if it isn't explicitly written for Gentoo: Gentoo's init scripts are not compatible with the init scripts used by other distributions! The basic layout of an init script is shown below.
Any init script requires the start() function to be defined. All other sections are optional. There are two dependencies you can define: use and need. As we have mentioned before, the need dependency is more strict than the use dependency. Following this dependency type you enter the service you depend on, or the virtual dependency. A virtual dependency is a dependency that a service provides, but that is not provided solely by that service. Your init script can depend on a system logger, but there are many system loggers available (metalogd, syslog-ng, sysklogd, ...). As you cannot need every single one of them (no sensible system has all these system loggers installed and running) we made sure that all these services provide a virtual dependency. Let us take a look at the dependency information for the postfix service.
As you can see, the postfix service:
In some cases you might not require a service, but want your service to be started before (or after) another service if it is available on the system (note the conditional - this is no dependency anymore) and run in the same runlevel (note the conditional - only services in the same runlevel are involved). You can provide this information using the before or after settings. As an example we view the settings of the Portmap service:
You can also use the "*" glob to catch all services in the same runlevel, although this isn't advisable.
If your service must write to local disks, it should need localmount. If it places anything in /var/run such as a pidfile, then it should start after bootmisc:
Next to the depend() functionality, you also need to define the start() function. This one contains all the commands necessary to initialize your service. It is advisable to use the ebegin and eend functions to inform the user about what is happening:
Both --exec and --pidfile should be used in start and stop functions. If the service does not create a pidfile, then use --make-pidfile if possible, though you should test this to be sure. Otherwise, don't use pidfiles. You can also add --quiet to the start-stop-daemon options, but this is not recommended unless the service is extremely verbose. Using --quiet may hinder debugging if the service fails to start.
If you need more examples of the start() function, please read the source code of the available init scripts in your /etc/init.d directory. Other functions you can define are: stop() and restart(). You are not obliged to define these functions! Our init system is intelligent enough to fill these functions by itself if you use start-stop-daemon. Although you do not have to create a stop() function, here is an example:
If your service runs some other script (for example, bash, python, or perl), and this script later changes names (for example, foo.py to foo), then you will need to add --name to start-stop-daemon. You must specify the name that your script will be changed to. In this example, a service starts foo.py, which changes names to foo:
start-stop-daemon has an excellent man page available if you need more information:
Gentoo's init script syntax is based on the Bourne Again Shell (bash) so you are free to use bash-compatible constructs inside your init script. If you want your init script to support more options than the ones we have already encountered, you should add the option to the opts variable, and create a function with the same name as the option. For instance, to support an option called restartdelay:
Service Configuration Variables You don't have to do anything to support a configuration file in /etc/conf.d: if your init script is executed, the following files are automatically sourced (i.e. the variables are available to use):
Also, if your init script provides a virtual dependency (such as net), the file associated with that dependency (such as /etc/conf.d/net) will be sourced too. 4.e. Changing the Runlevel Behaviour Many laptop users know the situation: at home you need to start net.eth0 while you don't want to start net.eth0 while you're on the road (as there is no network available). With Gentoo you can alter the runlevel behaviour to your own will. For instance you can create a second "default" runlevel which you can boot that has other init scripts assigned to it. You can then select at boottime what default runlevel you want to use. First of all, create the runlevel directory for your second "default" runlevel. As an example we create the offline runlevel:
Add the necessary init scripts to the newly created runlevels. For instance, if you want to have an exact copy of your current default runlevel but without net.eth0:
Even though net.eth0 has been removed from the offline runlevel, udev will still attempt to start any devices it detects and launch the appropriate services. Therefore, you will need to add each network service you do not want started (as well as services for any other devices that may be started by udev) to /etc/conf.d/rc as shown.
Now edit your bootloader configuration and add a new entry for the offline runlevel. For instance, in /boot/grub/grub.conf:
Voilà, you're all set now. If you boot your system and select the newly added entry at boot, the offline runlevel will be used instead of the default one. Using bootlevel is completely analogous to softlevel. The only difference here is that you define a second "boot" runlevel instead of a second "default" runlevel. 5. Environment VariablesAn environment variable is a named object that contains information used by one or more applications. Many users (and especially those new to Linux) find this a bit weird or unmanageable. However, this is a mistake: by using environment variables one can easily change a configuration setting for one or more applications. The following table lists a number of variables used by a Linux system and describes their use. Example values are presented after the table.
Below you will find an example definition of all these variables:
5.b. Defining Variables Globally To centralise the definitions of these variables, Gentoo introduced the /etc/env.d directory. Inside this directory you will find a number of files, such as 00basic, 05gcc, etc. which contain the variables needed by the application mentioned in their name. For instance, when you installed gcc, a file called 05gcc was created by the ebuild which contains the definitions of the following variables:
Other distributions tell you to change or add such environment variable definitions in /etc/profile or other locations. Gentoo on the other hand makes it easy for you (and for Portage) to maintain and manage the environment variables without having to pay attention to the numerous files that can contain environment variables. For instance, when gcc is updated, the /etc/env.d/05gcc file is updated too without requesting any user-interaction. This not only benefits Portage, but also you, as user. Occasionally you might be asked to set a certain environment variable system-wide. As an example we take the http_proxy variable. Instead of messing about with /etc/profile, you can now just create a file (/etc/env.d/99local) and enter your definition(s) in it:
By using the same file for all your variables, you have a quick overview on the variables you have defined yourself. Several files in /etc/env.d define the PATH variable. This is not a mistake: when you run env-update, it will append the several definitions before it updates the environment variables, thereby making it easy for packages (or users) to add their own environment variable settings without interfering with the already existing values. The env-update script will append the values in the alphabetical order of the /etc/env.d files. The file names must begin with two decimal digits.
The concatenation of variables does not always happen, only with the following variables: KDEDIRS, PATH, LDPATH, MANPATH, INFODIR, INFOPATH, ROOTPATH, CONFIG_PROTECT, CONFIG_PROTECT_MASK, PRELINK_PATH and PRELINK_PATH_MASK. For all other variables the latest defined value (in alphabetical order of the files in /etc/env.d) is used. When you run env-update, the script will create all environment variables and place them in /etc/profile.env (which is used by /etc/profile). It will also extract the information from the LDPATH variable and use that to create /etc/ld.so.conf. After this, it will run ldconfig to recreate the /etc/ld.so.cache file used by the dynamical linker. If you want to notice the effect of env-update immediately after you run it, execute the following command to update your environment. Users who have installed Gentoo themselves will probably remember this from the installation instructions:
5.c. Defining Variables Locally You do not always want to define an environment variable globally. For instance, you might want to add /home/my_user/bin and the current working directory (the directory you are in) to the PATH variable but don't want all other users on your system to have that in their PATH too. If you want to define an environment variable locally, you should use ~/.bashrc or ~/.bash_profile:
When you relogin, your PATH variable will be updated. Sometimes even stricter definitions are requested. You might want to be able to use binaries from a temporary directory you created without using the path to the binaries themselves or editing ~/.bashrc for the short time you need it. In this case, you can just define the PATH variable in your current session by using the export command. As long as you don't log out, the PATH variable will be using the temporary settings.
C. Working with Portage1. Files and DirectoriesPortage comes with a default configuration stored in /etc/make.globals. When you take a look at it, you'll notice that all Portage configuration is handled through variables. What variables Portage listens to and what they mean are described later. Since many configuration directives differ between architectures, Portage also has default configuration files which are part of your profile. Your profile is pointed to by the /etc/make.profile symlink; Portage' configurations are set in the make.defaults files of your profile and all parent profiles. We'll explain more about profiles and the /etc/make.profile directory later on. If you're planning on changing a configuration variable, don't alter /etc/make.globals or make.defaults. Instead use /etc/make.conf which has precedence over the previous files. You'll also find a /usr/share/portage/config/make.conf.example. As the name implies, this is merely an example file - Portage does not read in this file. You can also define a Portage configuration variable as an environment variable, but we don't recommend this. We've already encountered the /etc/make.profile directory. Well, this isn't exactly a directory but a symbolic link to a profile, by default one inside /usr/portage/profiles although you can create your own profiles elsewhere and point to them. The profile this symlink points to is the profile to which your system adheres. A profile contains architecture-specific information for Portage, such as a list of packages that belong to the system corresponding with that profile, a list of packages that don't work (or are masked-out) for that profile, etc. When you need to override Portage's behaviour regarding the installation of software, you will end up editing files within /etc/portage. You are highly recommended to use files within /etc/portage and highly discouraged to override the behaviour through environment variables! Within /etc/portage you can create the following files:
These don't have to be files; they can also be directories that contain one file per package. More information about the /etc/portage directory and a full list of possible files you can create can be found in the Portage man page:
Changing Portage File & Directory Locations The previously mentioned configuration files cannot be stored elsewhere - Portage will always look for those configuration files at those exact locations. However, Portage uses many other locations for various purposes: build directory, source code storage, Portage tree location, ... All these purposes have well-known default locations but can be altered to your own taste through /etc/make.conf. The rest of this chapter explains what special-purpose locations Portage uses and how to alter their placement on your filesystem. This document isn't meant to be used as a reference though. If you need 100% coverage, please consult the Portage and make.conf man pages:
The Portage tree default location is /usr/portage. This is defined by the PORTDIR variable. When you store the Portage tree elsewhere (by altering this variable), don't forget to change the /etc/make.profile symbolic link accordingly. If you alter the PORTDIR variable, you might want to alter the following variables as well since they will not notice the PORTDIR change. This is due to how Portage handles variables: PKGDIR, DISTDIR, RPMDIR. Even though Portage doesn't use prebuilt binaries by default, it has extensive support for them. When you ask Portage to work with prebuilt packages, it will look for them in /usr/portage/packages. This location is defined by the PKGDIR variable. Application source code is stored in /usr/portage/distfiles by default. This location is defined by the DISTDIR variable. Portage stores the state of your system (what packages are installed, what files belong to which package, ...) in /var/db/pkg. Do not alter these files manually! It might break Portage's knowledge of your system. The Portage cache (with modification times, virtuals, dependency tree information, ...) is stored in /var/cache/edb. This location really is a cache: you can clean it if you are not running any portage-related application at that moment. Portage's temporary files are stored in /var/tmp by default. This is defined by the PORTAGE_TMPDIR variable. If you alter the PORTAGE_TMPDIR variable, you might want to alter the following variables as well since they will not notice the PORTAGE_TMPDIR change. This is due to how Portage handles variables: BUILD_PREFIX. Portage creates specific build directories for each package it emerges inside /var/tmp/portage. This location is defined by the BUILD_PREFIX variable. By default Portage installs all files on the current filesystem (/), but you can change this by setting the ROOT environment variable. This is useful when you want to create new build images. Portage can create per-ebuild logfiles, but only when the PORT_LOGDIR variable is set to a location that is writable by Portage (the portage user). By default this variable is unset. If you don't set PORT_LOGDIR, then you won't receive any build logs with the current logging system, though you may receive some logs from the new elog. If you do have PORT_LOGDIR defined and you use elog, you will receive build logs and any logs saved by elog, as explained below. Portage offers fine-grained control over logging through the use of elog:
2. Configuring through VariablesAs noted previously, Portage is configurable through many variables which you should define in /etc/make.conf. Please refer to the make.conf man page for more and complete information:
Configure and Compiler Options When Portage builds applications, it passes the contents of the following variables to the compiler and configure script:
The USE variable is also used during configure and compilations but has been explained in great detail in previous chapters. When Portage has merged a newer version of a certain software title, it will remove the obsoleted files of the older version from your system. Portage gives the user a 5 second delay before unmerging the older version. These 5 seconds are defined by the CLEAN_DELAY variable. You can tell emerge to use certain options every time it is run by setting EMERGE_DEFAULT_OPTS. Some useful options would be --ask, --verbose, --tree, and so on. 2.c. Configuration File Protection Portage overwrites files provided by newer versions of a software title if the files aren't stored in a protected location. These protected locations are defined by the CONFIG_PROTECT variable and are generally configuration file locations. The directory listing is space-delimited. A file that would be written in such a protected location is renamed and the user is warned about the presence of a newer version of the (presumable) configuration file. You can find out about the current CONFIG_PROTECT setting from the emerge --info output:
More information about Portage's Configuration File Protection is available in the CONFIGURATION FILES section of the emerge manpage:
To 'unprotect' certain subdirectories of protected locations you can use the CONFIG_PROTECT_MASK variable. When the requested information or data is not available on your system, Portage will retrieve it from the Internet. The server locations for the various information and data channels are defined by the following variables:
A third setting involves the location of the rsync server which you use when you update your Portage tree:
The GENTOO_MIRRORS and SYNC variables can be set automatically through the mirrorselect application. You need to emerge mirrorselect first before you can use it. For more information, see mirrorselect's online help:
If your environment requires you to use a proxy server, you can use the http_proxy, ftp_proxy and RSYNC_PROXY variables to declare a proxy server. When Portage needs to fetch source code, it uses wget by default. You can change this through the FETCHCOMMAND variable. Portage is able to resume partially downloaded source code. It uses wget by default, but this can be altered through the RESUMECOMMAND variable. Make sure that your FETCHCOMMAND and RESUMECOMMAND stores the source code in the correct location. Inside the variables you should use \${URI} and \${DISTDIR} to point to the source code location and distfiles location respectively. You can also define protocol-specific handlers with FETCHCOMMAND_HTTP, FETCHCOMMAND_FTP, RESUMECOMMAND_HTTP, RESUMECOMMAND_FTP, and so on. You cannot alter the rsync command used by Portage to update the Portage tree, but you can set some variables related to the rsync command:
For more information on these options and others, please read man rsync. You can change your default branch with the ACCEPT_KEYWORDS variable. It defaults to your architecture's stable branch. More information on Gentoo's branches can be found in the next chapter. You can activate certain Portage features through the FEATURES variable. The Portage Features have been discussed in previous chapters, such as Portage Features. With the PORTAGE_NICENESS variable you can augment or reduce the nice value Portage runs with. The PORTAGE_NICENESS value is added to the current nice value. For more information about nice values, see the nice man page:
The NOCOLOR, which defaults to "false", defines if Portage should disable the use of coloured output. 3. Mixing Software BranchesThe ACCEPT_KEYWORDS variable defines what software branch you use on your system. It defaults to the stable software branch for your architecture, for instance x86. We recommend that you only use the stable branch. However, if you don't care about stability this much and you want to help out Gentoo by submitting bugreports to http://bugs.gentoo.org, read on. If you want to use more recent software, you can consider using the testing branch instead. To have Portage use the testing branch, add a ~ in front of your architecture. The testing branch is exactly what it says - Testing. If a package is in testing, it means that the developers feel that it is functional but has not been thoroughly tested. You could very well be the first to discover a bug in the package in which case you could file a bugreport to let the developers know about it. Beware though, you might notice stability issues, imperfect package handling (for instance wrong/missing dependencies), too frequent updates (resulting in lots of building) or broken packages. If you do not know how Gentoo works and how to solve problems, we recommend that you stick with the stable and tested branch. For example, to select the testing branch for the x86 architecture, edit /etc/make.conf and set:
If you update your system now, you will find out that lots of packages will be updated. Mind you though: when you have updated your system to use the testing branch there is usually no easy way back to the stable, official branch (except for using backups of course). 3.b. Mixing Stable with Testing You can ask Portage to allow the testing branch for particular packages but use the stable branch for the rest of the system. To achieve this, add the package category and name you want to use the testing branch of in /etc/portage/package.keywords. You can also create a directory (with the same name) and list the package in the files under that directory. For instance, to use the testing branch for gnumeric:
If you want to use a specific software version from the testing branch but you don't want Portage to use the testing branch for subsequent versions, you can add in the version in the package.keywords location. In this case you must use the = operator. You can also enter a version range using the <=, <, > or >= operators. In any case, if you add version information, you must use an operator. If you leave out version information, you cannot use an operator. In the following example we ask Portage to accept gnumeric-1.2.13:
The Gentoo developers do not support the use of this location. Please exercise due caution when doing so. Support requests related to package.unmask and/or package.mask will not be answered. You have been warned. When a package has been masked by the Gentoo developers and you still want to use it despite the reason mentioned in the package.mask file (situated in /usr/portage/profiles by default), add the exact same line in the /etc/portage/package.unmask file (or in a file in that directory if it is a directory). For instance, if =net-mail/hotwayd-0.8 is masked, you can unmask it by adding the exact same line in the package.unmask location:
When you don't want Portage to take a certain package or a specific version of a package into account you can mask it yourself by adding an appropriate line to the /etc/portage/package.mask location (either in that file or in a file in this directory). For instance, if you don't want Portage to install newer kernel sources than gentoo-sources-2.6.8.1, you add the following line at the package.mask location:
4. Additional Portage Toolsdispatch-conf is a tool that aids in merging the ._cfg0000_<name> files. ._cfg0000_<name> files are generated by Portage when it wants to overwrite a file in a directory protected by the CONFIG_PROTECT variable. With dispatch-conf, you are able to merge updates to your configuration files while keeping track of all changes. dispatch-conf stores the differences between the configuration files as patches or by using the RCS revision system. This means that if you make a mistake when updating a config file, you can revert to the previous version of your config file at any time. When using dispatch-conf, you can ask to keep the configuration file as-is, use the new configuration file, edit the current one or merge the changes interactively. dispatch-conf also has some nice additional features:
Make certain you edit /etc/dispatch-conf.conf first and create the directory referenced by the archive-dir variable.
When running dispatch-conf, you'll be taken through each changed config file, one at a time. Press u to update (replace) the current config file with the new one and continue to the next file. Press z to zap (delete) the new config file and continue to the next file. Once all config files have been taken care of, dispatch-conf will exit. You can also press q to exit any time. For more information, check out the dispatch-conf man page. It tells you how to interactively merge current and new config files, edit new config files, examine differences between files, and more.
You can also use etc-update to merge config files. It's not as simple to use as dispatch-conf, nor as featureful, but it does provide an interactive merging setup and can also auto-merge trivial changes. However, unlike dispatch-conf, etc-update does not preserve the old versions of your config files. Once you update the file, the old version is gone forever! So be very careful, as using etc-update is significantly less safe than using dispatch-conf.
After merging the straightforward changes, you will be prompted with a list of protected files that have an update waiting. At the bottom you are greeted by the possible options:
If you enter -1, etc-update will exit and discontinue any further changes. If you enter -3 or -5, all listed configuration files will be overwritten with the newer versions. It is therefore very important to first select the configuration files that should not be automatically updated. This is simply a matter of entering the number listed to the left of that configuration file. As an example, we select the configuration file /etc/pear.conf:
You can now see the differences between the two files. If you believe that the updated configuration file can be used without problems, enter 1. If you believe that the updated configuration file isn't necessary, or doesn't provide any new or useful information, enter 2. If you want to interactively update your current configuration file, enter 3. There is no point in further elaborating the interactive merging here. For completeness sake, we will list the possible commands you can use while you are interactively merging the two files. You are greeted with two lines (the original one, and the proposed new one) and a prompt at which you can enter one of the following commands:
When you have finished updating the important configuration files, you can now automatically update all the other configuration files. etc-update will exit if it doesn't find any more updateable configuration files. With quickpkg you can create archives of the packages that are already merged on your system. These archives can be used as prebuilt packages. Running quickpkg is straightforward: just add the names of the packages you want to archive. For instance, to archive curl, arts and procps:
The prebuilt packages will be stored in $PKGDIR/All (/usr/portage/packages/All by default). Symbolic links pointing to these packages are placed in $PKGDIR/<category>. 5. Diverting from the Official Tree5.a. Using a Portage Tree Subset You can selectively update certain categories/packages and ignore the other categories/packages. We achieve this by having rsync exclude categories/packages during the emerge --sync step. You need to define the name of the file that contains the exclude patterns in the --exclude-from variable in your /etc/make.conf.
Note however that this may lead to dependency issues since new, allowed packages might depend on new but excluded packages. 5.b. Adding Unofficial Ebuilds Defining a Portage Overlay Directory You can ask Portage to use ebuilds that are not officially available through the Portage tree. Create a new directory (for instance /usr/local/portage) in which you store the 3rd-party ebuilds. Use the same directory structure as the official Portage tree! Then define PORTDIR_OVERLAY in /etc/make.conf and have it point to the previously defined directory. When you use Portage now, it will take those ebuilds into account as well without removing/overwriting those ebuilds the next time you run emerge --sync. For the powerusers who develop on several overlays, test packages before they hit the Portage tree or just want to use unofficial ebuilds from various sources, the app-portage/gentoolkit-dev package brings you gensync, a tool to help you keep the overlay repositories up to date. With gensync you can update all the repositories at once, or select just a few of them. Each repository should have a .syncsource file in the /etc/gensync/ configuration directory which contains the repository location, name, ID, etc. Suppose you have two additional repositories called java (for the in-development java ebuilds) and entapps (for the applications developed in-house for your enterprise). You can update those repositories with the following command:
5.c. Non-Portage Maintained Software Using Portage with Self-Maintained Software In some cases you want to configure, install and maintain software yourself without having Portage automate the process for you, even though Portage can provide the software titles. Known cases are kernel sources and nvidia drivers. You can configure Portage so it knows that a certain package is manually installed on your system. This process is called injecting and supported by Portage through the /etc/portage/profile/package.provided file. For instance, if you want to inform Portage about gentoo-sources-2.6.11.6 which you've installed manually, add the following line to /etc/portage/profile/package.provided:
D. Gentoo Network Configuration1. Getting Started
To get started configuring your network card, you need to tell the Gentoo RC system about it. This is done by creating a symbolic link from net.lo to net.eth0 in /etc/init.d.
Gentoo's RC system now knows about that interface. It also needs to know how to configure the new interface. All the network interfaces are configured in /etc/conf.d/net. Below is a sample configuration for DHCP and static addresses.
Now that we have configured our interface, we can start and stop it using the following commands:
Now that you have successfully started and stopped your network interface, you may wish to get it to start when Gentoo boots. Here's how to do this. The last "rc" command instructs Gentoo to start any scripts in the current runlevel that have not yet been started.
2. Advanced ConfigurationThe config_eth0 variable is the heart of an interface configuration. It's a high level instruction list for configuring the interface (eth0 in this case). Each command in the instruction list is performed sequentially. The interface is deemed OK if at least one command works. Here's a list of built-in instructions.
If a command fails, you can specify a fallback command. The fallback has to match the config structure exactly. You can chain these commands together. Here are some real world examples.
Init scripts in /etc/init.d can depend on a specific network interface or just net. net can be defined in /etc/conf.d/rc to mean different things using the RC_NET_STRICT_CHECKING variable.
But what about net.br0 depending on net.eth0 and net.eth1? net.eth1 may be a wireless or PPP device that needs configuration before it can be added to the bridge. This cannot be done in /etc/init.d/net.br0 as that's a symbolic link to net.lo. The answer is making your own depend() function in /etc/conf.d/net.
For a more detailed discussion about dependency, consult the section Writing Init Scripts in the Gentoo Handbook. 2.c. Variable names and values Variable names are dynamic. They normally follow the structure of variable_${interface|mac|essid|apmac}. For example, the variable dhcpcd_eth0 holds the value for dhcpcd options for eth0 and dhcpcd_essid holds the value for dhcpcd options when any interface connects to the ESSID "essid". However, there is no hard and fast rule that states interface names must be ethx. In fact, many wireless interfaces have names like wlanx, rax as well as ethx. Also, some user defined interfaces such as bridges can be given any name, such as foo. To make life more interesting, wireless Access Points can have names with non alpha-numeric characters in them - this is important because you can configure networking parameters per ESSID. The downside of all this is that Gentoo uses bash variables for networking - and bash cannot use anything outside of English alpha-numerics. To get around this limitation we change every character that is not an English alpha-numeric into a _ character. Another downside of bash is the content of variables - some characters need to be escaped. This can be achived by placing the \ character in front of the character that needs to be escaped. The following list of characters needs to be escaped in this way: ", ' and \. In this example we use wireless ESSID as they can contain the widest scope of characters. We shall use the ESSID My "\ NET:
3. Modular NetworkingWe now support modular networking scripts, which means we can easily add support for new interface types and configuration modules while keeping compatibility with existing ones. Modules load by default if the package they need is installed. If you specify a module here that doesn't have its package installed then you get an error stating which package you need to install. Ideally, you only use the modules setting when you have two or more packages installed that supply the same service and you need to prefer one over the other.
We provide two interface handlers presently: ifconfig and iproute2. You need one of these to do any kind of network configuration. ifconfig is the current Gentoo default and it's included in the system profile. iproute2 is a more powerful and flexible package, but it's not included by default.
As both ifconfig and iproute2 do very similar things we allow their basic configuration to work with each other. For example both the below code snippet work regardless of which module you are using.
DHCP is a means of obtaining network information (IP address, DNS servers, Gateway, etc) from a DHCP server. This means that if there is a DHCP server running on the network, you just have to tell each client to use DHCP and it sets up the network all by itself. Of course, you will have to configure for other things like wireless, PPP or other things if required before you can use DHCP. DHCP can be provided by dhclient, dhcpcd, or pump. Each DHCP module has its pros and cons - here's a quick run down.
If you have more than one DHCP client installed, you need to specify which one to use - otherwise we default to dhcpcd if available. To send specific options to the DHCP module, use module_eth0="..." (change module to the DHCP module you're using - i.e. dhcpcd_eth0). We try and make DHCP relatively agnostic - as such we support the following commands using the dhcp_eth0 variable. The default is not to set any of them:
First we need to install the ADSL software.
Second, create the PPP net script and the net script for the ethernet interface to be used by PPP:
Be sure to set RC_NET_STRICT_CHECKING="yes" in /etc/conf.d/rc. Now we need to configure /etc/conf.d/net.
You can also set your password in /etc/ppp/pap-secrets.
If you use PPPoE with a USB modem you'll need to emerge br2684ctl. Please read /usr/portage/net-dialup/speedtouch-usb/files/README for information on how to properly configure it.
3.e. APIPA (Automatic Private IP Addressing) APIPA tries to find a free address in the range 169.254.0.0-169.254.255.255 by arping a random address in that range on the interface. If no reply is found then we assign that address to the interface. This is only useful for LANs where there is no DHCP server and you don't connect directly to the internet and all other computers use APIPA. For APIPA support, emerge net-misc/iputils or net-analyzer/arping.
For link bonding/trunking emerge net-misc/ifenslave. Bonding is used to increase network bandwidth. If you have two network cards going to the same network, you can bond them together so your applications see just one interface but they really use both network cards.
3.g. Bridging (802.1d support) For bridging support emerge net-misc/bridge-utils. Bridging is used to join networks together. For example, you may have a server that connects to the internet via an ADSL modem and a wireless access card to enable other computers to connect to the internet via the ADSL modem. You could create a bridge to join the two interfaces together.
You don't need to emerge anything for changing the MAC address of your interface if you have sys-apps/baselayout-1.11.14 or newer and want to change to a specific MAC address. However, if you need to change to a random MAC address or have a baselayout older than the version mentioned above, you have to emerge net-analyzer/macchanger to be able to make use of this feature.
You don't need to emerge anything for tunnelling as the interface handler can do it for you.
For VLAN support, emerge net-misc/vconfig. Virtual LAN is a group of network devices that behave as if they were connected to a single network segment - even though they may not be. VLAN members can only see members of the same VLAN even though they may share the same physical network.
4. Wireless NetworkingCurrently we support wireless setup either by wireless-tools or wpa_supplicant. The important thing to remember is that you configure for wireless networks on a global basis and not an interface basis. wpa_supplicant is the best choice, but it does not support all drivers. For a list of supported drivers, read the wpa_supplicant site. Also, wpa_supplicant can currently only connect to SSIDs that you have configured. wireless-tools supports nearly all cards and drivers, but it cannot connect to WPA only Access Points.
WPA Supplicant is a package that allows you to connect to WPA enabled access points. Its setup is fairly fluid as it is still in beta - however it works fine for the most part.
Now we have to configure /etc/conf.d/net to so that we prefer wpa_supplicant over wireless-tools (if both are installed, wireless-tools is the default).
That was simple, wasn't it? However, we still have to configure wpa_supplicant itself which is a bit more tricky depending on how secure the Access Points are that you are trying to connect to. The below example is taken and simplified from /usr/share/doc/wpa_supplicant-<version>/wpa_supplicant.conf.gz which ships with wpa_supplicant.
Initial setup and Managed Mode Wireless Tools provide a generic way to configure basic wireless interfaces up to the WEP security level. While WEP is a weak security method it's also the most prevalent. Wireless Tools configuration is controlled by a few main variables. The sample configuration file below should describe all you need. One thing to bear in mind is that no configuration means "connect to the strongest unencrypted Access Point" - we will always try and connect you to something.
Fine tune Access Point Selection You can add some extra options to fine-tune your Access Point selection, but these are not normally required. You can decide whether we only connect to preferred Access Points or not. By default if everything configured has failed and we can connect to an unencrypted Access Point then we will. This can be controlled by the associate_order variable. Here's a table of values and how they control this.
Finally we have some blacklist_aps and unique_ap selection. blacklist_aps works in a similar way to preferred_aps. unique_ap is a yes or no value that says if a second wireless interface can connect to the same Access Point as the first interface.
If you want to set yourself up as an Ad-Hoc node if you fail to connect to any Access Point in managed mode, you can do that too.
What about connecting to Ad-Hoc networks or running in Master mode to become an Access Point? Here's a configuration just for that! You may need to specify WEP keys as shown above.
Troubleshooting Wireless Tools There are some more variables you can use to help get your wireless up and running due to driver or environment problems. Here's a table of other things you can try.
4.d. Defining network configuration per ESSID Sometimes, you need a static IP when you connect to ESSID1 and you need DHCP when you connect to ESSID2. In fact, most module variables can be defined per ESSID. Here's how we do this.
5. Adding FunctionalityFour functions can be defined which will be called surrounding the start/stop operations. The functions are called with the interface name first so that one function can control multiple adapters. The return values for the preup() and predown() functions should be 0 (success) to indicate that configuration or deconfiguration of the interface can continue. If preup() returns a non-zero value, then interface configuration will be aborted. If predown() returns a non-zero value, then the interface will not be allowed to continue deconfiguration. The return values for the postup() and postdown() functions are ignored since there's nothing to do if they indicate failure. ${IFACE} is set to the interface being brought up/down. ${IFVAR} is ${IFACE} converted to variable name bash allows.
5.b. Wireless Tools function hooks
Two functions can be defined which will be called surrounding the associate function. The functions are called with the interface name first so that one function can control multiple adapters. The return values for the preassociate() function should be 0 (success) to indicate that configuration or deconfiguration of the interface can continue. If preassociate() returns a non-zero value, then interface configuration will be aborted. The return value for the postassociate() function is ignored since there's nothing to do if it indicates failure. ${ESSID} is set to the exact ESSID of the AP you're connecting to. ${ESSIDVAR} is ${ESSID} converted to variable name bash allows.
6. Network ManagementIf you and your computer are always on the move, you may not always have an ethernet cable or plugged in or an access point available. Also, you may want networking to automatically work when an ethernet cable is plugged in or an access point is found. Here you can find some tools that help you manage this.
ifplugd is a daemon that starts and stops interfaces when an ethernet cable is inserted or removed. It can also manage detecting association to Access Points or when new ones come in range.
Configuration for ifplugd is fairly straightforward too. The configuration file is held in /etc/conf.d/net. Run man ifplugd for details on the available variables. Also, see /etc/conf.d/net.example for more examples.
In addition to managing multiple network connections, you may want to add a tool that makes it easy to work with multiple DNS servers and configurations. This is very handy when you receive your IP address via DHCP. Simply emerge openresolv.
See man resolvconf to learn more about its features. The contents of this document are licensed under the Creative Commons - Attribution / Share Alike license. |
|
