[ << ] [ < ] [ Home ] [ > ] [ >> ]

1. Installing Gentoo

In this part you learn how to install Gentoo on your system.

Content:

1. About the Gentoo Linux Installation
   This chapter introduces you to the installation approach documented in this handbook.
2. Choosing the Right Installation Medium
   You can install Gentoo in many ways. In this chapter we explain how to install Gentoo using the ARM Netboot images.
3. Configuring your Network
   To be able to download the latest source code, you will need to setup networking.
4. Preparing the Disks
   To be able to install Gentoo, you must create the necessary partitions. This chapter describes how to partition a disk for future usage.
5. Installing the Gentoo Installation Files
   Gentoo installs work through a stage3 archive. In this chapter we describe how you extract the stage3 archive and configure Portage.
6. Installing the Gentoo Base System
   After installing and configuring a stage3, the eventual result is that you have a Gentoo base system at your disposal. This chapter describes how to progress to that state.
7. Configuring the Kernel
   The Linux kernel is the core of every distribution. This chapter explains how to configure your kernel.
8. Configuring your System
   You need to edit some important configuration files. In this chapter you receive an overview of these files and an explanation on how to proceed.
9. Installing Necessary System Tools
   In this chapter we help you choose and install some important tools.
10. Configuring the Bootloader
    Due to the wide variety of embedded systems that use the ARM processor, we may not cover your bootloader.
11. Finalizing your Gentoo Installation
    You're almost done. We'll just create one (or more) users for your system.
12. Where to go from here?
    Now you have your Gentoo system, but what's next?

[ << ] [ < ] [ Home ] [ > ] [ >> ]

The contents of this document, unless otherwise expressly stated, are licensed under the CC-BY-SA-2.5 license. The Gentoo Name and Logo Usage Guidelines apply.